Specifications

SOUND SYSTEM SPEAKERS
4
The following is a list of higher compliance speakers for use
with all sound units. These speakers are recommended for
applications that require heavy pounding such as an EMD
prime mover. All of these speakers have a paper diaphram.
The following is a list of speakers for use with all sound units. All speakers are 8 ohm impedance.
Item# Size (w-l-h) Freq. Resp. db Watts
215 0.8 x 1.6 x 0.41 300 - 20kHz 80 1
662 1.1 x 1.6 x 0.48 350 - 20kHz 83 2
664 1.6 x 2.8 x 1.3 280 - 20kHz 86 2
216 1.6 x 2.8 x 0.9 310 - 12kHz 82 3
667 2.0 x 3.5 x 1.5 200 - 20kHz 90 5
217 6 x 2.2 x 2 30 - 20kHz 95 13
660 2" round x 1.2h 100 - 5kHz 85 5
668 3" round x 1.5h 200 - 15kHz 90 3
The low profile speakers we offer have superior performance to
other speakers. Samarium Cobalt magnets are far stronger
than ferrite or Alnico type magnets thus making a more efficient
speaker (creating more sound per watt of input power). These
speakers have a mylar diaphram.
since manufacturers may change specifications and physical appearance, we
cannot guarantee that the speaker's shown will exactly match that received.
Item# Size (diaXh) Freq. Resp. db Watts
210 0.87 X 0.23 240-20kHz 86 1
211 1.1 X 0.23 250-20kHz 88 0.8
213 1.57 X 0.2 230-20kHz 83 1.5
214 1.97 X 0.3 350-20kHz 86 1
The following speakers have a higher wattage handling
capacity and efficiency rating. They are better suited for most
higher volume applications. Especially for use with an EMD
prime mover when a higher power, high compliance speaker,
can't be used. These speakers have a mylar diaphram.
not all speakers pictured but are similar in appearance.
Item# Size (dia X h) Freq. Resp. db Watts
661 1.5 X 0.2 320 - 10kHz 0.5
659 2.6 X 0.5 380 - 7.5kHz 84 0.8
#662
#667
#660
#661
#659
#214
#211
#213
#668
#217
#215
#664