User Manual

3.3 Wireless Connections
Once your WSR is installed and switched on, you
can begin the process of connecting it wirelessly
to your SOUND HUB or SOUND HUB
COMPACT. This is described in the following
steps.
• Ensure your SOUND HUB or SOUND HUB
COMPACT is switched on, then press the LINK
& CONNECT buon on its rear panel
A
. In the
case of a SOUND HUB, the top panel position
display will illuminate, and the front panel
volume indicator will cycle to indicate speaker
connection mode. In the case of a SOUND
HUB COMPACT, the top panel input indicators
will flash slowly to indicate speaker connection
mode.
• Now go to the WSR and press its LINK &
CONNECT buon
B
. The “SUB Setup Status”
indicator will illuminate while connection to the
SOUND HUB or SOUND HUB COMPACT
is underway. The WSR’s LINK & CONNECT
buon and indication is illustrated in Diagram 3.
B
Press the LINK & CONNECT buon
on the WSR.
A
Press the LINK & CONNECT buon
on the SOUND HUB/
SOUND HUB COMPACT.
POWER
15V 2.8A
DIAGRAM 3
Setup status LED
7