Operating instructions

13
English
The Suite C 0.7/0.8 central speaker has been specially designed to be
positioned close to the large surface of the TV screen - and can be placed
either above or below the screen, as required. Whether you position the
central speaker above or below your TV, we recommend having the front
of the speaker in line with the front of the TV. We recommend  tting the
enclosed rubber feet to ensure a stable, vibration-free set-up
The Suite R 0.7/0.8 rear speaker has been designed to be vertically mounted
1.2 to 2 metres off the  oor, ideally on a side wall slightly behind the lis-
tening position (bracket A). The speaker units should "radiate" sound in
towards your listening position, as shown in  g. 8.
The three mounting brackets for Suite R 0.7/0.8 make it
possible, however, to angle the speaker perfectly, inde-
pendent of positioning height. For very high positions
as rear channel or side speaker in 7.1 surround sound
systems, the speaker can be angled down towards the
listener (bracket B). For very low positions, the speaker
can be angled up towards the listener (bracket C). Once
you have chosen how R 0.7/0.8 is to be mounted in your
surround set-up, you can  t the enclosed logo on the
fabric framework to match your other DALI speakers
- at bottom centre of the fabric framework.
For the best surround sound experience, you need to be in a central listen-
ing position, but, of course, you can still enjoy surround sound, even if you
are not sitting in the exact ideal position (Fig. 8).
Fig. 8. Surround positioning
Remember that the tone controller is only intended for minor adjustments.