Firmware Notes

SOUND HUB COMPACT

Diagnostics Mode and Manual Channel Selection

The DALI wireless speaker systems are designed to work seamlessly out the box, and for the majori of cases the default

factory seings will ensure a plug and play experience.

However, In homes and environments busy with technology it is sometimes possible for the DALI SOUND HUB COMPACT

temporarily to lose the connection with the speakers when the wireless channel in use becomes congested. You may notice

your music repeatedly drops-out for a moment as the wireless connection automatically switches to an alternative channel.

The ﬁrst potential solution to this problem is to ensure that any unused wireless equipment nearby is switched o. Even

when in standby or sleep mode, some wireless equipment will still broadcast a signal and consume bandwidth, so if it is

unused, it is best fully Switched o.

If however you still experience occasional drop-outs, you can reconﬁgure your SOUND HUB COMPACT to remain

connected via a ﬁxed Wireless channel rather than switching channels automatically. This will prompt other wireless

equipment in your home automatically to switch to alternative channels and release more bandwidth for your wireless DALI

system.

To manually conﬁgure your SOUND HUB COMPACT to use a ﬁxed wireless channel, follow the Steps described on the

folowing pages.

PAGE 1
SOUND HUB COMPACT Diagnostics Mode and Manual Channel Selection The DALI wireless speaker systems are designed to work seamlessly out the box, and for the majority of cases the default factory settings will ensure a plug and play experience. However, In homes and environments busy with technology it is sometimes possible for the DALI SOUND HUB COMPACT temporarily to lose the connection with the speakers when the wireless channel in use becomes congested.
PAGE 2
SOUND HUB COMPACT Diagnostics Mode and Manual Channel Selection Press the LINK & CONNECT button on the SOUND HUB COMPACT >10 seconds. 5.8GHz Ch.3 LED 6 + 9 4 5.8GHz Ch.2 LED 5 + 9 >10 sec. 5.8GHz Ch.1 LED 4 + 9 5.2GHz Ch.3 LED 3 + 9 5.2GHz Ch.2 LED 2 + 9 Use volume UP/DOWN buttons on remote control to toggle and select channel. 2 5.2GHz Ch.1 LED 1 + 9 Auto Channel: LED 9 turns off 5 6 3 9 2 LED 9 : Indicates fixed channel select enabled.
PAGE 3
SOUND HUB COMPACT Diagnostics Mode and Manual Channel Selection Wireless Diagnostic mode: 1. With the music still playing, press and hold the SOUND HUB COMPACT Link & Connect button for 10 seconds then release it. This will launch the SOUND HUB COMPACT wireless diagnostic mode, where it is possible to read the wireless channel and manually select a channel. 2. The SOUND HUB COMPACT top panel LED indicators 8 and 10 will now illuminate as will one of indicators 1 to 6.