Owner's Manual
Table Of Contents
- Manual
- Contents
- Unpacking
- DALI Sound Hub Buttons overview
- DALI Sound Hub Connections overview
- Getting started
- Speaker pairing
- Connections
- Plug-In Modules
- Volume control
- Mute
- Auto sensing / Auto power on
- Display and LED dimming
- Bluetooth functions
- Individual speaker volume adjust
- Factory Reset
- Firmware update
- Cleaning
- Disposal
- Quick Set-up Guide
5.2 FINALIZING THE PAIRING
When all speakers are paired, and the wanted positions
are selected, return to the Sound Hub and press the LINK
& CONNECT button on the rear of the Sound Hub. All
paired speakers will then play a short sound.
If a position light on the Sound Hub position display is
blinking it indicates that the speaker is not connected or
has not been setup correctly.
The position display on the sound hub will turn off and
the volume display will again display the current volume.
The speakers are now ready to work with the Sound Hub.
Note: To add additional speakers to the Sound Hub
simply repeat steps 5.0 to 5.2.
9