Owner's Manual
Table Of Contents
- Manual
- Contents
- Unpacking
- DALI Sound Hub Buttons overview
- DALI Sound Hub Connections overview
- Getting started
- Speaker pairing
- Connections
- Plug-In Modules
- Volume control
- Mute
- Auto sensing / Auto power on
- Display and LED dimming
- Bluetooth functions
- Individual speaker volume adjust
- Factory Reset
- Firmware update
- Cleaning
- Disposal
- Quick Set-up Guide
5.1 ON THE SPEAKER
Go to the first speaker and press the LINK & CONNECT button on the rear of
the speaker.
When the speaker has paired up with the Sound Hub it will play a short sound.
The position display on the rear of the speaker, next to the LINK & CONNECT
button, will blink indicating that you now can set the speaker position.
Press the LINK & CONNECT button again until the wanted position is marked
in the position display on the rear of the speaker. The position changes every
time the LINK & CONNECT button is pressed.
When the correct position is shown on the rear position display, move on
to the next speaker.
Repeat 5.1 for all speakers that need to be paired with the Sound Hub.
8