Owner's Manual
Table Of Contents
- Manual
- Contents
- Unpacking
- DALI Sound Hub Buttons overview
- DALI Sound Hub Connections overview
- Getting started
- Speaker pairing
- Connections
- Plug-In Modules
- Volume control
- Mute
- Auto sensing / Auto power on
- Display and LED dimming
- Bluetooth functions
- Individual speaker volume adjust
- Factory Reset
- Firmware update
- Cleaning
- Disposal
- Quick Set-up Guide
13.0 INDIVIDUAL SPEAKER VOLUME ADJUST
It is possible to individually adjust the volume level of one or more speakers
in the system. This will lower or increase the volume on this one speaker in
comparison to the other speakers. To adjust the individual volume:
1. Turn on the Sound Hub.
2. Press and hold both the Mute and Source Select buttons at the same time.
3. When you hear a noise from one speaker, release both buttons.
Press and hold Press Press & hold
4. Volume is adjusted for the speaker outputting noise and with the volume LED
display turned on.
5. Press the Source Select button to toggle between the speakers.
6. Use the volume control to increase or decrease the volume of the selected speaker.
7. The individual volume is shown on the Sound Hub volume display as -9 to +9 dB.
8. When done, press and hold the Source Select button to save the new settings or
the Power button to cancel all changes.
19