Owner's Manual
Table Of Contents
- Manual
- Contents
- Unpacking
- DALI Sound Hub Buttons overview
- DALI Sound Hub Connections overview
- Getting started
- Speaker pairing
- Connections
- Plug-In Modules
- Volume control
- Mute
- Auto sensing / Auto power on
- Display and LED dimming
- Bluetooth functions
- Individual speaker volume adjust
- Factory Reset
- Firmware update
- Cleaning
- Disposal
- Quick Set-up Guide
Press and hold
10.0 AUTO SENSING / AUTO POWER ON
All inputs on the Sound Hub have auto sensing and will automatically activate the
Sound Hub and paired speakers when a signal is detected. This will turn on the
system and activate the correct input, if the system is in standby, or just activate
the correct input if the system is already On.
• Bluetooth, RCA In, Coaxial In and Optical In, all activate when an audio signal
is detected.
• Optical In (TV) activates when the carrier light in the optical cable is turned on.
Auto sensing does not allow one input to override another input that has an active
signal.
Auto sensing will activate an input that has an audio signal if the current input is
no longer receiving an audio signal. So, if your CD Player is playing music and you
manually select the TV input, the CD Player input could in some situations be auto
selected when you turn off your TV. To avoid this, always turn of any playback
before manually selecting another input.
The Sound Hub and the speakers will automatically power off after 30 minutes
with no audio signal.
Note: The mini-jack (AUX In) connector does not have Auto sensing.
Auto sensing can be deactivated leaving only manual source select:
1. Turn on the Sound Hub.
2. Press and hold the Source Select button on the front of the Sound Hub.
3. Turn the volume control to change the setting.
4. Release the Source Select button to save the new setting.
14