Operating instructions

Spikes:

On some ﬂ oor surfaces and in some rooms,

the use of spikes is a crucial aspect of obtain-

ing the best result. The spikes (included)

should be screwed in loosely in the four

aluminium feet, leaving the spike’s nut only

slightly tightened. Using the screws (included),

mount the feet in the threaded holes in the

bottom of the speaker. Push the feet against the

cabinet before tightening the screw.

Place the loudspeaker upright on its spikes on the

ﬂ oor, so that it stands steadily without rocking.

Tighten the nuts, so that the four spikes sit tightly

in the aluminium feet. These assembly and setup

steps ensure stable mechanical coupling to the

surface beneath.

Rubber feet:

The enclosed rubber feet may be used instead

of spikes. The rubber feet can be mounted on

the aluminium feet over the thread holes for the

spikes.

Figure 4. Mounting spikes