Operating instructions

13
SURROUND AMPLIFIER
LFE/Subwoofer
LINE OUT
Connection of DALI IKON Sub
When using the IKON subwoofer with active
crossover and built-in power amplifi er in your
stereo or surround system, there are two connec-
tion options.
The DALI IKON S
UB can be connected to the
subwoofer output of your surround amplifi er or
to the line output of your stereo pre-amplifi er.
Connection to surround amplifi er with separate
subwoofer output
If you want to use DALI IKON SUB for reproduc-
tion of the special subwoofer signal from a sur-
round amplifi er with separate subwoofer output
terminal, connect this to the LFE input terminal
on IKON S
UB.
If the LFE input terminal is selected, the crossover
network in IKON S
UB is not active. The LFE input
terminal should therefore only be used together
with a special subwoofer output terminal in
which the signal has already been fi ltered, so the
subwoofer only receives the lowest frequencies.
Figure 17. Connection to surround amplifi er
with separate subwoofer output