Operation Manual

UK DE DK

9.0 POWER AND ACOUSTIC PRESSURE

How loud a speaker is able to play and still sound good is totally dependent on the signal it

has to reproduce. This also means that you cannot deﬁne an unequivocal playback level when

comparing different speakers. An abundance of pure, undistorted output from a large ampliﬁer is

better than a distorted signal from a small ampliﬁer stretched beyond its capacity. The signal from

a distorting (clipping) ampliﬁer puts a heavy strain on the high-frequency driver. Consequently,

speakers are most often damaged by small ampliﬁers forced to work too hard, and very rarely by

large ampliﬁers, which are practically running idle.

In addition, we recommend that the tone controls generally be set to the neutral position and that

you achieve your desired sound image through correct positioning of the speakers. Ensuring that

you keep the volume low enough to keep the sound clear and undistorted will minimize the strain

on both speakers and ampliﬁer.

NOTE: We recommend that you use a high quality ampliﬁer or surround receiver with FAZON LCR

as the quality of the reproduced sound will beneﬁt from it. FAZON LCR is generally designed to

work well with the ampliﬁer that is integrated into many television sets but in most cases sound

quality will beneﬁt from using a good, external ampliﬁer.

10.0 TECHNICAL SPECIFICATIONS

In Table 2 you will ﬁnd the most relevant speciﬁcations for our speakers. Please have in mind that

there are countless methods for measuring speakers. However, none of them tell you anything

useful about how a speaker really sounds. Only your ears can decide whether one speaker sounds

better than another. Like all our speakers, DALI FAZON LCR is designed to reproduce music as

honestly as possible.

Enjoy your new DALI FAZON LCR!