Technical data

QUICKTRONIC
®
Intelligent DALI DIM | Introduction
5
Advanced technical developments have made this possi-
ble. Modern dimmable ECGs with digital (DALI = Digital
Addressable Lighting Interface) or analog (110 V) inter-
face in combination with the corresponding control ele-
ments and sensors lay the foundations for easy and
cost-effective realization.
1.1.3 Reliability/Safety
Reliability and safety play a crucial role when using
electronic control gears. The properties of a high-quality
dimmable ECG include:
Preheating of the lamp fi laments
Reliable lamp ignition to -20 °C ambient temperature
1)
Reliable lamp operation in a temperature range of
-20 °C to 75 °C
Reliable shutdown of the ECG in the event of failure,
in particular at “end of life” (EOL, safety shutdown of
the lamp at the end of its lifetime)
Complies with all currently valid ECG standards:
Safety (EN 61347) incl. EL symbols (Appendix J)
Operation (EN 60929)
Mains current line harmonics (EN 61000-3-2)
Radio interference from 9 kHz to 300 MHz
(EN 55015:2006 + A1:2007)/CDN measurement
in the frequency range above 30 MHz
Immunity (EN 61547)
1.1.4 The right control unit for every application
The dimmable ECGs are designed for multifaceted use.
Typical applications are, for example, of ces and industrial
halls with daylight-dependent controllers, conference and
meeting rooms with situation-based lighting or CAD rooms
and switch rooms with individual adjustment of the level of
light. The core of the lighting installation are the dimmable
QUICKTRONIC
®
Intelligent ECGs from OSRAM with DALI
or 110 V interface (QTi DALI/DIM) for operating compact
and fl uorescent lamps. These are controlled via a control
unit, a sensor or simple push-button/rotary dimmer. The
selection of the correct dimmer components to control the
lighting depends on the desired application. The require-
ment profi le for the dimmable lighting installation therefore
needs to be defi ned in detail.
1) With 10 % dimmer setting max. power output ECG on the lamp