Technical data

QUICKTRONIC

Intelligent DALI DIM | Dimming compact ﬂ uorescent lamps

6.1 Characteristics of the OSRAM KLL ECGs

—

The DULUX CONSTANT (amalgam) can also be operat-

ed on the DIM ECG

— Lamp start with optimized ﬁ lament heating within 0.6 s

— 2-lamp ECG now as small as 1-lamp ECG (K3 housing)

— Dimming range 3…100 % luminous ﬂ ux

— DALI and Touch DIM interfaces can be operated in an

ECG, for example, on DALI dimmer or Touch DIM sen-

sor

— Highest energy efﬁ ciency thanks to “cut-off” technology

— Automatic safety shutdown of lamps in the event of a

defect or at end of life (EOL T2)

— Optional cable clamp for snap-in into housing

Numerous applications can be covered in the downlight ar-

ea with just one type of luminaire in combination with the

new QTi-T/E-DALI/DIM generation from OSRAM. Therefore,

it is possible, for example, to easily and ﬂ exibly design dim-

mable lighting for a building with different ceiling heights

and varying luminaire installation locations (e.g. corridors,

foyer etc.). Multiple “lumen packages” are possible per

room. Thanks to optimized ﬁ lament preheating, the lamp

starts within 0.6 seconds. As a result, the user does not

have to accept unnecessary waiting times after switching

on.

The intelligent QTi-T/E-DALI/DIM devices automatically

adapt the ﬁ lament preheating at extremely low tempera-

tures. This allows stable operation of amalgam lamps. Intel-

ligent power reduction at excessive temperatures results in

a longer lifetime and reliable operation.

Principle of optional cable clamp for snapping into

housing

QTi T/E 2x18-42W DALI/DIM: Achievable in a single luminaire

Numerous applications can be covered with a single

type of luminaire …

—

Dimmable lighting for a building with different ceiling

heights and varying luminaire installation locations (e.g.

corridors, foyer etc.) can be easily and ﬂ exibly designed.

— Multiple lumen packages are possible per room.

2x DULUX T/E 26 W 2x DULUX T/E 32 W 2x DULUX T/E 42 W