Technical data

QUICKTRONIC

Intelligent DALI DIM | Additional properties of dimmable control gears from OSRAM

4.2.3 Wiring and cable compensation

— The cable length between the push-button and the far-

thest DALI ECG may not be longer than 25 meters.

Compensation measures must be applied for line

lengths required to be more than 25 meters long (bell

transformer, resistance).

— Do not use more than 20 DALI ECGs in a single Touch

DIM application (up to 20 ECGs can be controlled by

one push-button). The greater the number of DALI ECGs

controlled simultaneously, the greater the risk of

asynchronisms (see 3.2.6.2).

— Differing lamp families should not be mixed due to dif-

ferent preheating times (e.g. T5-HO lamps (500 ms start

time) vs. T5-HE lamps (700 ms start time)).

— Multiple control points are possible, provided the total

line length of 25 m is not exceeded.

— Touch DIM sensor: No more than four DALI ECGs

may be operated with a single Touch DIM sensor.

Maximum cable length (distance sensor/DALI ECG)

is 10 meters.

— The Touch DIM wiring and the operator button must be

rated for mains voltage (230 V).

Operation via push-button

Push-

button

PE N L1 L2 L3

Lamp

OSRAM DALI ECG

Lamp