Technical data

QUICKTRONIC

Intelligent DALI DIM | New properties of QTi DALI

3 New properties of QTi DALI

3.1 Corridor Function and parametrization options

3.1.1 Description

Corridor Function: It is possible to connect the ECG di-

rectly to commercially available motion sensors. The Corri-

dor Function is triggered by a switching signal, i.e. the volt-

age of the supply line (220–240 V, 50/60 Hz) is switched to

the DALI control line inputs (DA, DA; see the diagram be-

low). A preset “out-of-the-box” luminous ﬂ ux program

launches upon triggering. This can be individually adjusted

via OSRAM DALI Wizard and DALI magic. Three light value

ranges and six time ranges are available for this purpose.

Several OSRAM DALI ECGs can be synchronized in an in-

stallation via the frequency of the mains voltage (50/60 Hz).

The maximum number of ECGs in an installation is only lim-

ited by the sum of the inrush current surges from the indi-

vidual ECGs. Additional installation instructions can be

found in chapter 10.8.

Advantage

Development of new applications (stairwells, corridors,

large storage facilities, …) with the possibility for saving

energy and achieving high energy efﬁ ciency.

CORRIDOR

FUNCTION

OSRAM DALI ECG wiring diagram for Corridor Function

Motion sensor

PE N L1 L2 L3

Lamp

OSRAM DALI ECG

Lamp