Technical data

QUICKTRONIC
®
Intelligent DALI DIM | Overview of dimmable control gears
11
Note
T5 fl uorescent lamps should be inserted so that the lamp
stamps are on the same side. The lamp stamp should be
at the bottom (“cold spot”) with a vertical burning position.
In the event of non-compliance, the lamp wattage data can
fl uctuate greatly. In any case, the function (as well as the re-
quirements for evenness) should be checked at all dimmer
settings using a sample setup.
Correct:
The lamp cables are twisted and laid close to the respec-
tive lamps. The overlapping of the three lamp current
circuits on the right is minimized.
Incorrect:
The lamp cables of all ECGs are laid together and they also
form overlapping lamp current circuits.
Three 2-lamp ECGs
2 21 1
5 54 4
3 31 1
7 76 6
2 21 1
5 54 4
3 31 1
7 76 6
2 21 1
5 54 4
3 31 1
7 76 6