Technical data

7.
Page 50/51
7.3.
7.3.1.
Dimming channels and defining
PRESETS
Remote control IRC 2130
Light scenarios can comprise up to five individually
dimmed channels with the TRIOS system. Once chosen,
a combination of dimming values can be saved as a
PRESET and recalled by simply pressing a button.
The PRESET values are recorded in the individual TRIOS,
not in the remote control device. Factory settings of the
TRIOS DALI are P1=100%, P2=50%, P3=25%, P4=10%.
The IR remote control IRC 2130 is a tool for controlling
channels and presets.
Figure 15: Function keys of the IR remote control IRC 2130
The functionality of the five pairs of channel buttons
depends on the duration for which they are pressed:
• Left: short duration = "Off", long duration = dimmer
• Right: short duration = "On", long duration = brighter
The steps mentioned in Figure 15 can be used to define a
new preset or to modify an existing one:
• Create the required lighting scenario by dimming the
channels individually (1)
• Press "Save" (record) button (2)
• Press "Preset" button (3)
The lighting scenario has now been recorded under this
PRESET button and can be called up again at any time.
The group address of the IRC 2130 infrared transmitter
is set using the group selector switch in the battery
compartment. "All groups" is used, for example, to
implement a central function.
back to contents