Technical data

7.1.2.
7.1.1.
7.1.
7.
Page 46/47
Programming the
TRIOS DALI
7.1.3.
Defining terms
Luminaire group
A luminaire group consists of one or more luminaires
containing a DALI ballast.The addressing operation
assigns an address to each DALI ballast or luminaire.
Different luminaires can be combined into a single
luminaire group (see Addressing the luminaires).
IR channel
If one or more luminaires are combined into a luminaire
group, this, in the case of TRIOS DALI, is known as a
channel.There are five IR channels, numbered from
"1" to "5". Each TRIOS DALI can switch and dim up to
five channels individually.
Figure 9: Five channels, each can be dimmed individually
PRESET
When the use of a room is changed, it is possible to
change the lighting to match the new requirements.
Work at a desk involving the use of a monitor for
example, requires lighting quite different to that needed
for a conference or for a presentation with a beamer.
Individual ambiences, each tuned to a particular activity,
can be created by dimming each channel and the required
setting can be recorded as a "PRESET" or light scene
(see Section 7.3).The personal light scenes can be
instantly recalled by pressing the appropriate button of
the ir transmitter. Up to four presets are possible.
Figure 10: Four presets
back to contents