Technical data

6.7.

Page 38/39

Daylight-controlled light regulation,

with infrared remote control

Application

This solution provides flexible lighting and the ability to

regulate dependent on daylight conditions, and is

therefore ideal for modern offices. It is also suitable for

renovations, since no switches need to be installed.

back to contents

Parts list

Quantity Type

1 TRIOS DALI LRC 1620

Surface-mounted version

DALI control unit

1 Multisensor

LRI 8133

Any IR remote control, e.g.:

number IRC 2130

- 5 channels, 4 scenes

IRT 8050

- 2 switches

1 Sensor line

LCC 8014 5m plug/plug

Circuit diagram

Programming

See chapter on programming and notes on daylight-controlled light regulation

No daylight control: P2, P3, P4 – Programming will require the temporary connection of a

programming transmitter IRT 1090

Function

Switch on Switch off Dim Circuits Nominal value

setting

Manual 2-5

Automatic 2

at PRESET 1 at 150% of ref.

light level

TRIOS DALI switches off the lighting installation when there is sufficient natural light. It can only be switched on

manually.This prevents the system from switching on again unnoticed after staff have left.