Technical data

6.4.
6.
Daylight-controlled light regulation,
automatic
Application
Energy saving through daylight use, with automatic
reactivation. Is used in offices or factories with central
control systems.
back to contents
Function
Switch on Switch off Dim Circuits Nominal value
setting
Manual 1
Automatic 2
at min light level at 150% of ref.
light level
TRIOS DALI automatically switches on the lighting installation at dusk.
A central switch, or switch installed in the circuit before the TRIOS control unit is required to deactivate
the system outside office hours.
Parts list
Quantity Type
1 TRIOS DALI LRC 1620
Surface-mounted version
DALI control unit
1 Daylight sensor
LRL 8101
1 Sensor line
LCC 8014 5m plug/plug
Circuit diagram
Programming
See chapter on programming and notes on daylight-controlled light regulation – Programming
will require the temporary connection of an IR receiver IRR 8125 and a programming
transmitter IRT 1090
Central
switch