Technical data

contents
Page 4/5
Page
6. APPLICATIONS WITH
PROGRAMMING 33
6.1. Manual switching and regulation, push-
button interface and push-button 33
6.2. Manual switching and regulation,
infrared control 34
6.3. Manual switching and regulation,
infrared control, push-button
interface and switch 35
6.4. Daylight-controlled light regulation,
automatic 36
6.5. Daylight-controlled light regulation,
with manual control, switch 230V 37
6.6. Daylight-controlled light regulation,
with manual control, switch module
and switch 38
6.7. Daylight-controlled light regulation,
with infrared remote control 39
6.8. Movement-controlled lighting, with
manual
control, switch module and switch 40
6.9. Movement-controlled lighting, with
infrared remote control 41
6.10. Daylight regulation and movement-
controlled lighting, fully automatic 42
6.11. Daylight regulation and movement-
controlled lighting, switch 230V 43
6.12. Daylight regulation and movement-
controlled lighting, with manual
control, switch module and switch 44
6.13. Daylight regulation and movement-
controlled lighting, with manual
control, infrared remote control 45
6.14. Daylight regulation and movement-
controlled lighting, with manual
control, infrared remote control and
push-button interface 46
Page
7. PROGRAMMING THE
TRIOS DALI 47
7.1. Defining terms 47
1.1. Luminaire group 47
1.2. IR channel 47
1.3. PRESET 47
1.4. Group 48
7.2. Allocating addresses and assigning
them to a luminaire group 49
7.2.1. Addressing with IRT 1090 49
2.2. Addressing with IRT 8050 50
7.3. Dimming channels and defining
PRESETS 51
3.1. Remote control IRC 2130 51
3.2. Group setting IRC 2130 52
3.3. Wall-mounted remote control
IRT 8050 53
3.4. Group setting IRT 8050 53
3.5. Function setting IRT 8050 54
3.6. Push-button interface LCU 8020 55
7.4. TRIOS activation/deactivation
behaviour 56
8. NOTES ON DAYLIGHT-
CONTROLLED LIGHT
REGULATION 57
8.1. Difference between "control" and
"regulation" 57
8.2. Principle of the light regulation circuit 57
8.3. Daylight-dependent switching or
dimming? 58
8.4. Tips for positioning the light sensor 58
4.1 Light sensor recording range 59
4.2 Light regulation with lateral windows 59
4.3 Regulation of overhead lights 61
8.5. Multiple regulation zones in a single
room 61
8.6. Daylight-controlled regulation 62
6.1. Master / slave programming 63
6.2. Setting the required value 63
9. PRODUCT OVERVIEW 65