DALI 4a congratulations on your fine judgment. In its class the DALI 4a is one of the very finest loudspeakers on the market. To get the maximum performance from DALI 4a we recommend, that you read this manual before installing your new speakers.
POSITIONING DISTANCE Dal hanged on the wall at a distance FROM WALLS of between Alisa gives the best reproach emi (43:10) from the Hoot, suction when placed on a measured from the bottom of speaker support of between the speaker 20 emi in) and 40 em (16 in). DALI 4: should be placed Hereafter the system should vertically: note placed closer tithe back Corner location should wall than 20 cm (8in), and the be avoided.
POSITIONING X EQUAL DISTANCE: he distance from ANGLING (TOE-IN): your normal listen normally necessitating position to both chary except where speakers should be the walls are highly equal. This distance sound absorbent. In should also equal the this case a slight distance between both ing may improve speakers. stereo imaging.
CONNECTION he gold plated terminal on DALI 4a makes it possible to use banana plugs or heavy bared wires for amplifier connection. IMPORTANT! Turn off the amplifier when vou are working at loudspeaker connection! PHASING DAILY USE 0 get a true stereo-reproduction It is necessary, that the loudspeakers are phased correctly. Connect always the amplifiers + to the loudspeakers +, and the amplifiers — fo the loudspeakers —.
DOCUMENTATION he original Dali 4a was the most popular of the Dali range. The reason is a combination of two qualities ~ it sounded good — and it could play loud without strain! To make the design of Dali 4a significantly worthwhile, we required that it should retain these important qualities while possessing a performance standard approaching that of Dali 7, the sonic reference in the Dali range. The driver compliment of Dali 4a consists of two 8 woofers and a 17 dome tweeter.
MEASUREMENTS TT Input impedance Frequency response on axis. SPECIFY Cabinet Yipe cov derive verve Closed Drivers Woo 2x8" textile dome 1st quality components 3 KHz metrical Tweeter Linear Directive wer frequent: Impedance 4 ohms System resonance... quo. B0Hz Frequency response =3aB 45 20. 000 Hz 90° +7 93dBAW im Listening window +2dB hor. . ver. Sensitivity Recommended amplifier power ratings 10 to 100 Channelize Dimensions Height . Teem (29787) Width .
