Operator`s manual

66 OmniSport 2000 Pro Swimming Software
Event Data
The top area of the
main application
screen displays
current event details
and options as
shown in (Figure 74). The elapsed time is displayed to the right of the Daktronics logo. The
Event, Heat, Length, and Round are set by the event order file, but may be selected by clicking
the [↑↓] keys to the right of the data fields. The operator must manually increment the event
number, heat number, and round at the end of an event or heat. To change the event order
file, refer to Section 6.6.
Note: Though editing may be done, the data will not be saved in the event order file.
 Clicking Store/Print will store the current event data into an event file and print the
results according to the configurations.
 Clicking Reset will reset the time and begin a new event. Reset also stores the
current event data into an event file and prints the data according to the
configurations set in the Configurations dialog if Store/Print was not clicked
The upper left area of the main application screen contains five buttons (Figure 75) used
before and during events.
The buttons are described below from left to right:
 Edit Start Time allows the user to change the start
time of any event. This is not enabled during
events (mainly used when a start input is missed).
 Disqualify toggles a swimmer‘s disqualification flag. Click this button and select the
lanes to be disqualified.
 Split Arm All arms all touchpads to take split times.
 Finish Arm All arms all touchpads to take finish times.
 Race Log File opens the race log file for the current race.
Figure 74: Event Data Area
Figure 75: Five buttons