Installation Instructions

CUSTOM LENGTH SHELVING - If Applicable
Some of your shelving may need to be cut to a custom length
in order to create a wall-to-wall closet solution. To create a
smooth, clean cut on your shelves, apply painter’s tape to the
area you intend to cut & cut your shelves using a circular saw
using a high tooth count (80 teeth is optimal) blade. Once
shelves are cut to the custom length, use L-brackets to attach
the cut edge to the upright. These brackets are designed to
attach to the pre-drilled holes in the closet uprights using the
euro screws provided. Wood screws are also provided in the
package to attach the L-bracket to the underside of your custom cut shelf.
CORNER BRACKETS - If Applicable
Corner Brackets come in a pack of 3 and are designed to attach shelves perpendicularly to each other. Each pack
of corner brackets includes wood screws to install the brackets to one of the shelves prior to installing the shelf.
Attach the corner bracket using the supplied screws to the custom cut shelves on wall A. Next, install this shelf
with the bracket attached, at the height of the adjacent shelf already installed on wall B to complete the corner.
WALL A
WALL B
Step 1: Attach bracket to the custom cut shelf Step 2: Cam Lock the uncut side of the custom shelf, and
use the corner bracket to clip into the adjacent shelf.
6