User Manual

User Manual DMAC-JD3C
Author: CNR Revised by: SJE Revision Date: 06/03/22 Page 1 of 2
User Manual
AgCam®/EnduraCam®/RazerCam™ Camera to John Deere GreenStar 3 2630 Three
Camera Adapter Cable
*Check the equipment’s user manual for the video capabilities (CVBS/AHD or NTSC/PAL) with the display
Cable Connectors
A. (3) 5-Pin Female Switchcraft Connectors (to Camera)
B. John Deere Power Input Plug
C. 26-Pin Tyco Connector
Installation Instructions
1. Plug Part A into the Camera Cables.
2. Plug Part B into the John Deere Power Strip.
3. Plug Part C into the Video Input Port. **
**See your equipment’s user manual for exact location of camera connection ports.
Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.
Cable Specifications
Description
This adapter cable allows for the input of three (3) AgCam®/EnduraCam®/RazerCam™
cameras into a John Deere GreenStar 3 2630 monitor.
Part Number
DMAC-JD3C
Cable Length
133 Inches
Compatible Monitors
John Deere GreenStar 3 2630
Compatible Cameras
AgCam®, EnduraCam®, RazerCam™
Monitor Inputs
1
Camera Inputs
3
CVBS or AHD Compatible*
CVBS
NTSC or PAL Compatible*
NTSC or PAL
Warranty Period
1 Year
A.
B.
C.
A.
B.
C.