User Manual

User Manual DMAC-JD2COC
Author: CNR Revised by: SJE Revision Date: 06/02/22 Page 1 of 2
User Manual
AgCam®/EnduraCam®/RazerCam™ Camera to John Deere CommandView II Cab
Adapter Cable
*Check the equipment’s user manual for the video capabilities (CVBS/AHD or NTSC/PAL) with the display
Cable Connectors
A. 6-Pin Male Deutsch Connector for pre-wired JD CommandView II Cabs (to Monitor)
B. (2) 5-Pin Female Switchcraft Connectors (to Camera)
Installation Instructions
1. Locate the Video Input Port. In the pre-wired cabs, the port is labeled “Video Camera Only.” **
2. Plug Part A into the Video Input Port.
3. Plug Part B into the Camera Cables.
**See your equipment’s user manual for exact location of camera connection ports.
Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.
Cable Specifications
Description
This adapter cable allows for the input of two (2) AgCam®/EnduraCam®/RazerCam™
cameras into the John Deere CommandView II Cab.
Part Number
DMAC-JD2COC
Cable Length
79 Inches
Compatible Monitors
CommandView II Cab
Compatible Cameras
AgCam®, EnduraCam®, RazerCam™
Monitor Inputs
1
Camera Inputs
2
CVBS or AHD Compatible*
CVBS
NTSC or PAL Compatible*
NTSC or PAL
Warranty Period
1 Year
A.
B.
A.
B.