User Manual

User Manual DMAC-CNH1F

Author: AJC Revised by: SJE Revision Date: 06/02/22 Page 1 of 2

User Manual

AgCam®/EnduraCam®/RazerCam™ Camera to CNH 7-Pin Mini AMP Video Adapter

Cable

*Check the equipment’s user manual for the video capabilities (CVBS/AHD or NTSC/PAL) with the display

Cable Connectors

A. 7-Pin Female Green Mini Amp Machine Connector (to Monitor)

B. 5-Pin Female Switchcraft Connector (to Camera)

Installation Instructions

1. Locate the green 7-pin male connectors (reference the picture to the

right) **

2. Plug Part A into one of the green 7-Pin male connectors.

3. Plug Part B into the Camera Cable.

**See your equipment’s user manual for exact location of camera connection

ports.

Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.

Cable Specifications

Description

This adapter cable allows for the input of one (1) AgCam®/EnduraCam®/RazerCam™

camera into the prewired CNH equipment.

Part Number

DMAC-CNH1F

Cable Length

13 Inches

Compatible Monitors

AFS Pro 700, Intelliview IV

Compatible Cameras

AgCam®, EnduraCam®, RazerCam™

Monitor Inputs

Camera Inputs

CVBS or AHD Compatible*

CVBS

NTSC or PAL Compatible*

NTSC or PAL

Warranty Period

1 Year

PAGE 1
User Manual DMAC-CNH1F User Manual AgCam®/EnduraCam®/RazerCam™ Camera to CNH 7-Pin Mini AMP Video Adapter Cable Cable Specifications This adapter cable allows for the input of one (1) AgCam®/EnduraCam®/RazerCam™ camera into the prewired CNH equipment.
PAGE 2
User Manual DMAC-CNH1F Consumer Limited Warranty Subject to the disclaimer, limitations and other directions stated hereafter, Dakota Micro, Inc. warrants that the Product will be free from defects in material and workmanship for periods as stated hereafter from the date of original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS.