User Manual

User Manual DMAC-CNH1
Author: CNR Revised by: SJE Revision Date: 06/02/22 Page 1 of 2
User Manual
AgCam®/EnduraCam®/RazerCam™ Camera to CNH Intelliview, AFS Pro Monitor, or
DVR Adapter Cable
*Check the equipment’s user manual for the video capabilities (CVBS/AHD or NTSC/PAL) with the display
Cable Connectors
A. BNC Male Connector (to Monitor or DVR)
B. Power Input Port (12v power adapter included but not shown)
C. 5-Pin Female Switchcraft Connector (to Camera)
Installation Instructions
1. Plug Part A into the Video Input Port on the monitor or DVR **
2. Plug Part B into the 12v Power Source.
3. Plug Part C into the Camera Cables.
**See your equipment’s user manual for exact location of camera connection ports.
Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.
Cable Specifications
Description
This adapter cable allows for the input of one (1) AgCam®/EnduraCam®/RazerCam™
camera to AFS Pro and IntelliView monitors, or a DVR with BNC inputs.
Part Number
DMAC-CNH1
Cable Length
57 Inches
Compatible Monitors
AFS Pro, Intelliview, or DVR with BNC inputs
Compatible Cameras
AgCam®, EnduraCam®, RazerCam™
Monitor Inputs
1
Camera Inputs
1
CVBS or AHD Compatible*
CVBS or AHD
NTSC or PAL Compatible*
NTSC or PAL
Warranty Period
1 Year
B.
A.
C.
A.
B.
C.