Specifications

ManualsBrandsDakota Micro ManualsComputer equipmentDMAC?9M?C2

Dakota Micro, Inc.

Rev:09/29/2014Page1of12Author:CNR



UsersManual

AgCam®

PartNumber:DMAC‐9MQ(‐C2)











Reliable

Profitable

Capable



Alwaysreadthemanualpriortooperatingthisequipment.Also,pleasefollowallsafetysignsandprecautions.



SeetheDakotaMicro,Inc.websiteforinstallationtrainingvideosatwww.dakotamicro.com.



TableofContents



I.IncludedMonitor&CameraKitComponents2

II.StandardFeatures2‐3



 A.Cameras

 B.Monitors

 C.Cables

III.PartsofanAgCam3



 A.Camera

IV.CameraMounting3‐4



 A.TemporaryMounting

 B.PermanentMounting

 C.SuggestionsforCameraMounting

V.CameraWarnings4



VI.CableRoutingTips&Warnings4



VII.MonitorInstallation&Mounting4‐5



 A.MountingPrecautions

 B.UniversalBracketMounting

 C.FinalizingUniversalBracketInstallation

VIII.Installation5



 A.MonitorWireHarnessDetails

IX.Power5



 A.SupplyingPowerwith12vPowerAdaptor

 B.HardwirePowerAdaptor

 C.Fuses

X.EventTriggerWireOperations6



 A.EventTriggerWireColorGuide

 B.EventTriggerWiresExplained

XI.Monitor,Quad,&RemoteOperation6‐7



 A.QuadMonitorOperations‐Front

 B.QuadMonitorOperations‐Back

 C.RemoteOperations

XII.StandardMonitorMenuSettings8



 A.StandardMonitorMenuSettingsNavigation

XIII.QuadMenuSettings9



XIV.Specifications10



 A.Camera

 B.LCDMonitor

 C.QuadProcessor

XV.Warnings11



XVI.ProductWarranty/RepairProcess12



XVII.ConsumerLimitedWarranty12



XVIII.Disclaimer12



XVIV.ContactUs12



PAGE 1
Dakota Micro, Inc. Users Manual AgCam® Part Number: DMAC‐9MQ (‐C2) Table of Contents MORE Capable Profitable Reliable I. Included Monitor & Camera Kit Components II. Standard Features A. Cameras B. Monitors C. Cables III. Parts of an AgCam A. Camera IV. Camera Mounting A. Temporary Mounting B. Permanent Mounting C. Suggestions for Camera Mounting V. Camera Warnings VI. Cable Routing Tips & Warnings VII. Monitor Installation & Mounting A. Mounting Precautions B. Universal Bracket Mounting C.
PAGE 2
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual INCLUDED MONITOR KIT COMPONENTS (PER PN: DMAC‐9MQ) Description INCLUDED CAMERA KIT COMPONENETS (PER PN: DMAC‐C1) Picture Description Dakota Micro, Inc.
PAGE 3
Dakota Micro, Inc. B. Monitors      C. Cables    DMAC-9MQ(‐C2) User Manual Feature the latest in LCD technology. View 1, 2, or 4 cameras at the same time; also includes two (2) different Quad views. Include event triggers for each camera input. Color, brightness, contrast and volume controls that allow compensation for use in different environments. Remote control, sun shield, and metal U‐bracket included. Silicone jacket enables high flexibility in all temperatures.
PAGE 4
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual C. Suggestions for Camera Mounting o When determining the location for the camera, it is always best to use a solid surface to minimize vibration. o Important‐ Ladders are not good mounting choices due to lack of stability. o If you will be using your AgCam® for assisting in visibility for towing, you will want to position the camera so you can see the desired area and a portion of the vehicle/trailer in tow; this will give you some reference to distance.
PAGE 5
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual WARNING: Dakota Micro, Inc. is not responsible for any damages caused to your monitor, or yourself, due to the improper installation or use of a suction cup monitor mount, whether it be product sold by DM or product purchased from another source. B. Universal Bracket Mounting 1. Hold monitor U‐bracket in place on monitor. 2. Attach bracket with included wing bolts. C. Finalizing Universal Bracket Installation 1.
PAGE 6
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual X. EVENT TRIGGER WIRE OPERATIONS A. Event Trigger Wire Color Guide 1. Camera 1 – Green 2. Camera 2 – Purple 3. Camera 3 – Gray 4. Camera 4 – White B. Event Trigger Wires Explained Event trigger wires can be attached to any 12v positive event. This will cause the monitor to change to that camera, regardless of the state of the monitor (i.e. ON/OFF or channel selection). The most recent event will be the primary display.
PAGE 7
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual B. Quad Monitor Operations ‐ Back and  Move up and down through individual menu options  and  Move left and right through individual menu options ENTER Allows users to select a chosen Quad option MENU Button displays Quad menu options on monitor C.
PAGE 8
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual XII. STANDARD MONITOR MENU SETTINGS PICTURE SYSTEM BRIGHT: CONTRAST: COLOR: TINT: RESET: Adjusts the brightness of the image. Adjusts the contrast of the image. Adjusts the color of the image. Adjust tint of image. (Appears only when camera is plugged in.) Returns settings to factory default. LANG: Select your language (English default) SOURCE: Adjusts the AV input source (AV1 default). GUIDE LINES: Superimposes a grid on screen.
PAGE 9
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual XIII. QUAD MENU SETTINGS SYSTEM SETUP DATE: Set your current date. MONTH:DAY: YEAR TIME: Set your current time. HOUR:MINUTE:SECOND SYSTEM FORMAT: Video system. NTSC/PAL selectable. SYSTEM ID NUMBER: Select unique ID # for quad. KEY LOCK: When set to ON position, only individual camera views available. When set to OFF position, all functions available CAMERA PRIORITY: Function not available on this model. VCR OUT: Function not available on this model.
PAGE 10
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual XIV. SPECIFICATIONS A. Camera Effective Picture Elements Image Pick‐up Device Horizontal Resolution Minimum Illumination S/N Ration Auto Electronic Shutter Auto White Balance Auto Gain Control Auto Iris Control Scanning System Gamma Characteristic Lenses Furnished Synchronous System Back Light Compensation Video Output Operating Temp. Construction Waterproofing criteria Dimensions B.
PAGE 11
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual XV. WARNINGS 1. To avoid electrical shock and maintain optimal functionality, do not open the enclosures. High voltage may be present and there are no user serviceable parts inside. All warranties will be void should any enclosures be tampered with in any way. 2. Do not use any harsh chemical solvents, cleaning agents or corrosive detergent to clean away dirt on the surface of the screen or lens. 3.
PAGE 12
Dakota Micro, Inc. DMAC-9MQ(‐C2) User Manual XVII. CONSUMER LIMITED WARRANTY LIMITED WARRANTY Subject to the disclaimer, limitations and other directions stated hereafter, Dakota Micro, Inc. warrants that the Product will be free from defects in material and workmanship for periods as stated hereafter from the date of original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS.