Tus neeg siv phau ntawv

User Manual DMAC-2USB
AU: CNR BY: SJE V3 REV: 11/08/22 Page 4 of 12
Included Components
Before you Install
Before you install your software there are a few things you should do to prepare. Doing so will help to avoid
any trouble you could encounter due to out-of-date drivers or security updates. Please take a few moments to
perform the following:
1. Note: Simple Sight software only works with CVBS (analog) cameras.
2. Make sure you have at least the minimum hardware requirements.
• Desktop or Laptop with available USB 2.0 port or greater.
• Windows OS, XP, Vista, Windows 7, 8 or 10.
• 1GB RAM installed.
• HDD space of at least 10MB.
• CPU 2 GHz or better may work on slower computer but you may need to select a lower resolution
camera image for best results.
• Internet Connection for installation
3. Run Windows update or Microsoft update (depending on your version of Windows) and allow the
computer to update all updates available.
4. If you are running any Anti-Virus software, you may want to temporarily suspend the software during
installation.
Network Requirements
1. Always use with a high-speed internet connection.
2. Wired connection (preferred; wireless will work) to host computer.
3. Static IP address (preferred if viewing outside your local network; dynamic will work but will change
periodically. Note: in some instances, you may need to contact your ISP to allow viewing outside of your
local network.
4. Configurable router (settings are the customers responsibility; Dakota Micro technical support is not
able to assist with router configuration).
Description
Picture
AgCam®/EnduraCam®/RazerCam™ USB Adapter
3 AMP A/C Power Adapter Locking
PN: DM-PA3