Installation & Assembly

Step 8
Step 9
Insert the Upper Pole(F) into Lower Pole(E) and align mounting positions.
Insert Lower Pole(E) into Base(A), turn the Lower Pole(E) and align mounting positions.
Attention the Lower Pole(E) and Upper Pole(F)'s screw holes need to backward.
Attach Upper Pole(F) to Lower Pole(E) using Bolt(③) and Washer(④) with Spanner(12) .
Now, tighten all Bolts and Nuts at all joints sequential manner.
Place Bolt Caps(⑥) on Bolts and Nut Caps(⑦) on Nuts(⑤).
Insert the Carabiner on the Safety Line(⑩) into the Base(A), and screw up the Carabiner.
Your Hanging Chair Base is ready for use.
This Hanging Chair Base can only be used on a flat, level surface.
Upper Pole (F)
Lower Pole(E)
③
④
Base (A)
Safety Line (⑩)
Noble House Home Furnishings LLC Page 8 OF 10