Instruction Manual

Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
www.dakecorp.com
901002 6 REV012021
SPECIFICATIONS
Model
Y
Throat
4-1/2”
Number
901002
Max ram to table
7-3/4”
Capacity
1-1/2 tons
Base length
15”
Leverage ration
32:1
Base width
6”
Ram size
1”x1”x12”
Height
14-1/2”
Max diameter work
9”
Weight
60 lbs
SAFETY
This is the safety alert symbol. When you see this symbol on your press be alert to the
potential for personal injury.
Employer is responsible to perform a hazard/PPE assessment before work activity.
Follow recommended precautions and safe operating practices.
Carefully read all safety
messages in these
instructions and on your
press safety signs. Keep
safety labels in good
condition. Replace missing or
damaged safety labels.
This machine is intended to
be operated by one person.
This person should be
conscious of the press ram
movement not only for
themselves but also for
persons in the immediate
area of the machine.
Under no circumstances
increase the leverage ratio
of the press by using a
longer handle or by placing
a pipe over the handle.
Never hammer on top of the
ram.
Label Part No. 300168
Label Part No.
79979