Instruction Manual

13
10 TON FLOOR UTILITY PRESS PARTS LIST
Ref # Dake Part # Description Qty.
1 301154 Frame upright channel 2
2 301153 Head frame channel 2
3 / 4 301152 / 301151 Head ram traverse plates 1 upper & lower
5 301150 Bolt M10 x 120mm 2
6 301149 Lock washer 10mm 2
7 301148 Union Support 1
8 301147 Base angle 2
9 301146 Bolt M8 x 25 12
10 301129 Lock washer 8mm 12
11 301128 Nut M8 12
12 301145 Angle support strap 4
13 301144 Pump support bracket 1
14 301143 Bolt M10 x 25 5
15 301142 Lock washer 10mm 4
16 301141 Nut M10 4
17 301123 Work table 1
18 301124 Table plate 2
19 301127 Flat nose piece (1-5/8 – 12) 1
20 301126 Step nose piece (1-5/8 – 12) 1
21 301140 Ram / Cylinder 1
22 301121 Pumping unit 1
23 301125 Table pin 2
24 301136 Bolt M12 x 110mm 4
25 301135 Lock washer 12mm 4
26 301134 Nut M12 4
27 Bolt M8 x 25 4
28
301120
Gauge 1
29 Ring 1
Spare seals should be stored in safe location out of direct sunlight if future is
required.
When ordering parts have model and date of purchase information ready.
For assistance call Dake Service at 1-800-937-3253 or fax to 1-800-846-3253
e-mail to [e-mail]