DAKE MANUAL COLD SAW Technics 250 INSTRUCTIONAL MANUAL WARNING! Read and understand all instructions and responsibilities before operating. Failure to follow safety instructions and labels could result in serious injury. Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 Phone: 800.937.3253 www.dakecorp.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com TABLE OF CONTENTS DAKE STANDARD LIMITED WARRANTY ............................................................ 2 RETURN & REFUND POLICY ............................................................................... 4 DAKE STANDARD TERMS & CONDITIONS OF SALE ........................................ 5 SPECIFICATIONS ..................................................................................................
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com DAKE STANDARD LIMITED WARRANTY Finished Machines Dake warrants to the original purchaser the finished machine manufactured or distributed by it to be free from defects in material and workmanship under normal use and service within 1 year (12 months) from the delivery date to the end user.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com Warranty Exceptions: The following conditions are not applicable to the standard limited warranty: a) Part installation or machine service was not completed by a certified professional, and is not in accordance with applicable local codes, ordinances and good trade practices.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com RETURN & REFUND POLICY Thank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are here to help. Returns All Dake manufactured / distributed machines and parts include a 30-day return option. These policies are valid from the date of final shipment to the end user. To be eligible for a return, the item must be unused and in the same condition as received.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com DAKE STANDARD TERMS & CONDITIONS OF SALE All proposals and quotations for the original sale of our products are subject to the following terms and conditions: ACCEPTANCE OF ORDER: All orders are subject to acceptance by Dake at its main office in Grand Haven, Michigan. APPLICABLE LAWS: This quotation or acceptance shall be governed in all respects by the laws of the State of Michigan.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com SPECIFICATIONS Model Number Voltage Phase Horsepower Speeds Max blade diameter Technics 250 974250E-1 110V 1 1.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com SAFETY This is the safety alert symbol. When you see this symbol on your machine be alert to the potential for personal injury. Carefully read all safety messages in these instructions and on your machine safety signs. Keep safety labels in good condition. Replace missing or damaged labels. Employer is responsible to perform a hazard/PPE assessment before work activity. Label Part No. 84395 Label Part No.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com • Do not operation machine without safety guards or with the electrical panel cover removed. • Always disconnect the machine from the power socket before changing the disk or carrying out any maintenance job, even in the case of abnormal machine operation. • Do not operate this machine without the handle and/or handle switch disconnected. • Always wear OSHA approved safety glasses when operating this machine.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com SET UP TRANSPORTING AND MOUNTING When you receive your machine, you will need a forklift for transporting. When lifting the machine, a sling needs to be used. Position the machine on a firm cement floor, keeping a minimum distance from 2-1/2 feet from any wall. ASSEMBLING THE MACHINE The following parts will be with your machine upon receiving: Handle and stock stop.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com ELECTRICAL CONNECTION Before connecting the machine to the main power, make sure that the installation has a disconnected box. The machine is not equipped with an electrical plug, the customer must provide a suitable plug for the machine. See diagram below for wire connection.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com STARTING THE SAW • Mix the coolant that comes with the machine at a 10:1 ratio. Add about a half-gallon of mixed coolant in the machine bed. • Place material to be cut in the vice (1) and clamp the material in place by turning the hand wheel (2) clockwise. • Turn the power switch clockwise to the on position.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com CHANGING THE BLADE Refer to the pictures below for part identifications. WARNING! Before changing the blade, electrical supply must be LOCKED OUT! Always use gloves while handling loose blades. 1. Move the head of the saw into its upright position. 2. Using a 5mm hex wrench to remove the safety guard bolt and move the safety guard back out of the way. 3. Using a 10mm hex wrench, turn the blade bolt clockwise to loosen.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com 5. Clean both sides of the flange that are on either side of the blade and return the inside flange to its place. 6. Clean all surfaces of the new blade before putting the new blade on. a. Make sure the teeth are in the downward position, and blade turns clockwise. b. Line up the holes of the blade with the flange pinholes of the first flange half. 7.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com MAINTENANCE Before performing any maintenance ensure that the machine is LOCKED OUT and unplugged. Special maintenance operations must be carried out by skilled personnel. However, we advise contacting DAKE. The term special maintenance also covers resetting of protection/safety equipment and devices. DAILY MAINTENANCE • Check/fill coolant. • Check blade wear. • Check functionality of safety shields.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com CHANGING THE GEAR BOX OIL 80/90 Synthetic Gear Oil, we recommend MOBIL SHC635. Refer to pictures below for further help. 1. Disconnect machine from its power supply. 2. Remove the handle and the plug coming out of the handle that goes to the electrical box. 3. Use a bucket to collect the old oil; unscrew sight level gauge drain the oil into the bucket. 4. Once all oil is drained screw the bolt back in. 5.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com PART LIST Item Part Name 1 Pedestal 2 Revolving Arm 3 Revolving Arm Lock Pin Revolving Arm Lock Bushing Revolving Arm Lock Lever Screw (M8-2.25 x 20mm) Pin (Ø 6mm x 36mm) Stock Stop Rod Stock Stop Quick Lock Vise Screw M12 Vise Jaw Washer Screw M12 Vise Adjusting Handwheel Socket Cap Screw (M8-1.25 x 20mm) Filter Support Flange Assembly Socket Head Cap Screw (M5 x 12mm) Washer (8.
Dake Corporation 1809 Industrial Park Dr. Grand Haven, MI 49417 www.dakecorp.com Item Part Name 42 44 45 Handgrip O-Ring (ID 30mm x OD 40mm) Oil Plug Spindle 47 48 43 49 50 51 52 53 54 55 56 57-60 61 62 63 64 Part No. Item Part Name Part No. 44600001 119 Bearing 84500001 86001049 120 Vice Jaw Washer AFB80033 88302002 AFC10010 121 122 82504217 47100000 Drive Pins AFC10013 124 Blade Flange Socket Cap Screw (M12-1.
