User Manual

2
MODEL AND SPECIFICATIONS
ELECTRICAL DIAGRAMS
CAUTION
20 AMP circuit breaker is recommended for the TB-16 and SB-16 models.
30 AMP circuit breaker is recommended for the SB-25 110 volt model.
Machine
Specifications:
Model TB-16 Model SB-16 Model SB-25 Model
SB-32
Drill Type
Bench Floor Floor Floor
Max. Drill Capacity
5/8” 5/8” 1” 1-1/4”
Spindle Taper
MT2 MT2 MT3 MT4
Spindle Travel
3-1/8” 3-1/8” 5” 5-1/4”
Max. Work Diameter
14-1/8” 14-1/8” 18” 18”
Speeds (Step Pulley)
9 9 9 9
Spindle Speed Range
240-3400 240-3400 270-2000 270-2290
Column Diameter
3-1/8” 3-1/8” 3-5/8” 4”
Table
11-3/4 x 11-3/4” 11-3/4 x 11-3/4” 14 x 14” 15-3/4 x 15-3/4”
Base
17-3/4 x 12-1/8” 19-1/2 x 12-1/2” 23-1/2 x 15” 23-1/2 x 15”
Spindle to Table
16-1/2” 28-1/4” 28-1/4” 26-1/4”
Spindle to Base
25-1/2” 49” 49-1/8” 50”
Motor
½ HP ½ HP 1 HP 2 HP
Electrics
CE CE CE CE
Voltage
120 Volt 120 Volt 220 V – 3 PH 220 V – 3 PH
Overall Height
42-1/2” 64” 71” 71”
Weight
155 lbs. 210 lbs. 397 lbs. 463 lbs.