DAKE SINGLE PHASE DURA-PRESS Force 50DA INSTRUCTIONAL MANUAL WARNING! Read and understand all instructions and responsibilities before operating. Failure to follow safety instructions and labels could result in serious injury. Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 Phone: 800.937.3253 www.dakecorp.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com TABLE OF CONTENTS DAKE STANDARD LIMITED WARRANTY............................................................ 2 RETURN & REFUND POLICY .............................................................................. 4 SAFEGUARDING THE POINT OF OPERATION .................................................. 5 SPECIFICATIONS ................................................................................................ 6 SAFETY ......................
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com DAKE STANDARD LIMITED WARRANTY Finished Machines Dake warrants to the original purchaser the finished machine manufactured or distributed by it to be free from defects in material and workmanship under normal use and service within 1 year (12 months) from the delivery date to the end user.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com Warranty Exceptions: The following conditions are not applicable to the standard limited warranty: (a) Part installation or machine service was not completed by a certified professional, and is not in accordance with applicable local codes, ordinances and good trade practices. (b) Defects or malfunctions resulting from improper installation or failure to operate or maintain the unit in accordance with the printed instructions provided.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com RETURN & REFUND POLICY Thank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are here to help. Returns All Dake manufactured / distributed machines, parts and couplings include a 30-day return option. These policies are valid from the date of final shipment to the end user. To be eligible for a return, the item must be unused and in the same condition as received.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com SAFEGUARDING THE POINT OF OPERATION ANSI B11.2 - Hydraulic Power Presses Safety Requirements for Construction, Care, and Use It is important that Dake press users have a clear understanding of their responsibility involving the care and use of their Dake hydraulic press, including point-of-operation safe guards. Dake strongly recommends that Dake press users obtain a copy of the current American National Standard Institute (ANSI) B11.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com SPECIFICATIONS Model Number Capacity Horse Power Voltage Ram Travel Pressing Speed Width between uprights Max. ram to table Height Base Weight Force 50DA 909250 50 tons 2 HP 110V/220V 16” 11 ipm 44” 41-3/4” 94” 55” x 36” 3,450 lbs. In the space provided record the serial number and model number of the machine. This information is only found on the black and gold Dake tag shown below.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com SAFETY This is the safety alert symbol. When you see this symbol on your press be alert to the potential for personal injury. Employer is responsible to perform a hazard/PPE assessment before work activity. Label Placement View Label Part No. 300168 Label Part No. 76462 909250 Label Part No. 84399 Label Part No. 302070 7 Label Part No. 84395 Label Part No.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com Follow recommended precautions and safe operating practices. It is important that the operator understand all safety instruction listed below in order to prevent damage to themselves, others, or the machine: • Carefully read all the safety messages in this manual and on your press safety labels. Keep safety labels in good condition. Replace missing or damaged safety labels. • Do not alter this press from its original design.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com WIRING INSTRUCTIONS WARNING: A licensed qualified electrician that follows all state and local laws must wire and install electrics on this press. 110 Volt WARNING: Machine must have a designated 30 amp drop for 110 volts. This press will not operate correctly without 30 amps. For 110 volts this machine is ready to plug in. The machine can be wired 220-volt single phase.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com HYDRAULIC LINES AND FITTINGS – 2022 and later If press was manufactured year 2022 or later (Serial No. > WOD-7942), power unit, valve, hose, and fittings will be of new configuration. Valve control handle left to right configuration. See below for updated components breakdown.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com HYDRAULIC LINES AND FITTINGS – 2022 and prior For presses made year 2022 and prior (Serial No. < WOD-7942). Valve control handle up & down configuration.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.
1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com 50 DA WORKHEAD DIAGRAM ITEM A B C D E F G H J - 909250 16 DESCRIPTION Piston Piston Guide Cylinder Socket Head Screw Seal T-Ring Wear Ring Wear Ring T-Ring Deal Workhead Assembly PART NO.
09 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com POWER UNIT REPLACEMENT PARTS If press was manufactured year 2022 or later (Serial No. > WOD-7942), power unit, valve, hose, and fittings will be of new configuration. See components below. Description Part No.
