User Manual

Force 10DA & Force 25DA

Press set-up

Installation Instructions

Your new Dake Press has been packaged in a manner to prevent damage to any critical components; some

assembly may be required. All parts in the accessory box are critical to the function of your press. Some

presses may come completely assembled.

NOTE: FOR EASE OF ASSEMBLY LEAVE THE PRESS FRAME MOUNTED ON THE SHIPPING SKID

1. Remove plastic from the machine.

2. Open the box and you will see a pumping unit, with the press still

laying on its side. Locate the four holes on the side of the press facing

up.

3. Place the pumping unit on the side of the press with the mounting

bracket facing down, making sure the holes all line up.

4. There are four bolts, washers and nuts in a bag, in the box. Put the

bolts in the holes using the washers and nuts. Make sure all nuts

and bolts are tight.

5. With the press lying on its side fill the reservoir with DTE 24 Mobile oil

or equivalent.

WARNING!!!!

Be sure all bolts and fittings are tight before operating this pumping unit,

personal injury could result.