DAKE AIR ARBOR PRESS Model 1-204, 1-210 and 1-220 INSTRUCTIONAL MANUAL WARNING! Read and understand all instructions and responsibilities before operating. Failure to follow safety instructions and labels could result in serious injury. Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 Phone: 800.937.3253 www.dakecorp.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com TABLE OF CONTENTS DAKE STANDARD LIMITED WARRANTY............................................................ 2 RETURN & REFUND POLICY .............................................................................. 4 DAKE STANDARD TERMS & CONDITIONS OF SALE ........................................ 5 SPECIFICATIONS ................................................................................................ 6 SAFETY ..........
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com DAKE STANDARD LIMITED WARRANTY Finished Machines Dake warrants to the original purchaser the finished machine manufactured or distributed by it to be free from defects in material and workmanship under normal use and service within 1 year (12 months) from the delivery date to the end user.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com Warranty Exceptions: The following conditions are not applicable to the standard limited warranty: a) Part installation or machine service was not completed by a certified professional, and is not in accordance with applicable local codes, ordinances and good trade practices.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com RETURN & REFUND POLICY Thank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are here to help. Returns All Dake manufactured / distributed machines and parts include a 30-day return option. These policies are valid from the date of final shipment to the end user. To be eligible for a return, the item must be unused and in the same condition as received.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com DAKE STANDARD TERMS & CONDITIONS OF SALE All proposals and quotations for the original sale of our products are subject to the following terms and conditions: ACCEPTANCE OF ORDER: All orders are subject to acceptance by Dake at its main office in Grand Haven, Michigan. APPLICABLE LAWS: This quotation or acceptance shall be governed in all respects by the laws of the State of Michigan.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com SAFETY This is the safety alert symbol. When you see this symbol on your press be alert to the potential for personal injury. Employer is responsible to perform a hazard/PPE assessment before work activity. Label Part No. 300168 Follow recommended precautions and safe operating practices. Carefully read all safety messages in these instructions and on your press safety signs. Keep safety labels in good condition.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com SET UP 1. Fasten press to bench or work surface using the mounting holes provided (item 1 below). 2. Connect a 3/8” air supply to the filter-regulator (item 38) located at the rear of the press frame. CAUTION! Air must be moisture free! Water in the air supply may damage the press beyond repair! Airline lubrication is not required. 3. Adjust the air regulator for proper operating pressure as follows: a.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com RAM SPEED ADJUSTMENT There are openings in each side of the control enclosure for screwdriver adjustment of the press ram speed. The opening on the right side (looking from the front) controls the up speed and the other one is for the down speed. Turning the screw clockwise decreases the speed.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com Part Number Parts Name 1/8” Tube Line 32 (L.H. air valve to element) 33 #10-24 x 1/2" Screw 1/8” Tube Line 34 (Sub-plate to element) 1/8” Tube Line 35 (R.H. air valve to element) 36 #10-32 x 1/2" Rd. Hd. Screw 37 1/4”-20 x 3/8 Rd. Hd. Screw 38 Filter Regulator 39 1/4” Pipe Nipple – Brass 39 1/4” Pipe Nipple – Brass 40 1/4” Hex Nut 41 1/4” Washer 43 Label – Made in U.S.A.
