User manual

19 |
"Auto Takeoff failure, the aircraft is already flying!"
"Auto Takeoff failure, please switch to auto mode!"
2.3 Joystick and Keyboard
Click Pause, choose joystick or keyboard mode, Fig.① shows that keyboard is chosen, and then key board
will be used to control the aircraft.
 Keyboard Mode
The keys W, S, A, D, ↑, ↓ and ←, → are used to control the aircraft. W、S for Pitch, A, D for Roll, ↑, ↓for
Throttle and ←, → for Rudder. For example, use helicopter to be aircraft model, shown as Fig.②.
 Joystick Mode
 Requirement
Joystick control based on a third party hardware controller, you can choose your preferred device based on
the two types of joystick indicated below (Fig③).
Type 1: Traditional R/C style flight simulation controller; or your R/C Tx with a third party simulator link.
Type 2: Linear single stick 3D controller.
 Technology Requirements
 USB connection and at least 4 linear control channels are necessary; otherwise the joystick
function will not work properly.
 Use USB connection.
Fig②
图
①
Fig③
Roll Elevator Yaw Collective Pitch
→
→
→
→
W S
A
D
Type 2Type 1
Real Flight® InterLink™ Plus Controller Logitech® Extreme™ 3D Pro Joystick
Fig①
Fig.
②