User manual

18 |
2 Joystick/Keyboard Mode
Joystick/Keyboard mode is the 2
nd
permission for users, and Fly Simulation, One Key Takeoff and
Joystick/Keyboard functions can be operated.
2.1 Simulator
Our system support Pre-Flight Simulation aims to help you getting familiar with the Ground Station software. A
successful flight under simulation mode does not guarantee your aircraft to work successfully in real world,
since it is only a virtual environment based on the assumption that your aircraft is working under perfect
condition with infinity power supply, favorable weather, and also that the GIS & GPS are providing 100%
correct and precise information. The aircraft physical model in simulator might not perform the same flight
characteristic as your real aircraft.
Notices:
ENSURE the following requirements whenever during/before Simulation Mode:
1) You MUST NOT takeoff using your aircraft;
2) You MUST NOT turn on your aircraft engine/motor;
3) You CAN disconnect the power supply for electric motor, or disconnect the throttle control servo
motor for fuel engine. Otherwise, incorrect operation could result in serious personal injuries.
Please follow the steps strictly for the use of Simulation Mode:
STEP1: Hold Ctrl then right-click, you will see simulate, and the aircraft logo will be at the current mouse
position.
STEP2: Click simulate, you will see a “Warning” window.
STEP3: Click Yes to turn on Simulation Mode. Now GS is in Simulation Mode!!!
Notices:
We HIGHLY RECOMMEND Simulation Mode for practicing purpose for flight mission edit, try to get
familiar with all the operations of your Ground Station as much as you can.
2.2 One Key Takeoff
Notices:
One key takeoff is a function especially for WKM, that can be used only in autopilot mode and when GPS
signal is good.
Messages may be showed as follows:
Successful takeoff message
"The aircraft is auto Takeoff!"
Error messages
"Auto Takeoff failure, GPS is not ready!"
“The aircraft is Takeoffing!"