User manual

16 |
Click DEFAULT to retrieve default parameters.
The system setting includes both Basic Setting and Data Link Setting.
Basic Setting
Sound: If switch on, there will be alarm sound when the radio signal is bad;
Instrument Board Style: Choose different instrument board style；
Action Setting: Set action number display mode. For example, 3 means that a mark will be displayed every
three action intervals;
Pause Mode Control Interval: Time interval of sending commands to the MC when use joystick or
keyboard in pause mode;
Target Line: Display a line between aircraft and current target when switch on.
Data Link Setting
Setting parameters for the communication between MC and GS. Usually just keep DEFAULT parameters.
Waypoint number of one data package
Retry times of uploading one package
Timeout of retransmit one data package