User manual

8
Gimbal Description
(To GCU G6)
Damping Unit
(To GCU G8)
Servo Driver Module Port
Encoder Private Port
Motor Command Input Port
Pan
±360° continuous rotation
Servo Driver Module 3
Cameral Mount Position
Camera Mount Screw-hole
HDMI-AV Port
IMU Module
HDMI-AV Module
Tilt
±360° continuous rotation
±40° (±360° mechanic
continuous rotation)
Roll
Servo Driver Module 2
Shutter Control Moudle
Servo Driver Module 1
Mounting Bracket
Motor Command Input Port
8-Pin Cable
Gimbal LED Indicator
Lens Retaining Ring
Lens Retaining Ring Shim
Notices:
 Ensure nothing blocks the servo driver module rotation, to avoid motor damage.
 Clear obstacle at once if the rotating gimbal is blocked.
Tips:
 Servo driver module is with two motor command input ports and one encoder private port.
 HDMI-AV module converts HDMI video signal to AV video signal with a cable connecting to camera
HDMI port; also transforms TX signal into shutter control signal with a shutter control module.
 Shutter control module is for camera shutter control using an infrared signal emission head.