User manual

In Box

Gimbal ×1

In the mechanical structure, the gimbal has built-in slip rings,

preventing wire rod from winding up, which also enables free rotations

for the 3 axes rotating rods.

The gimbal has built-in DJI gimbal special servos drive module,

independent IMU module and HDMI－AV module.

Gimbal Controller Unit (GCU)×1

Connect the gimbal controller to the autopilot system by CAN bus.

The GCU will control the gimbal’s pan, roll and tilt axes rotation.

Lens Retaining Ring×1, L-Connector ×1

For fixing the camera lens.

(With jackscrew ×2)

Lens Retaining Ring Shim×1

For fastening the camera lens.

Mounting Bracket ×4

For gimbal and bi-pod connection.

Camera Mount Screw×1

For camera mount.

Lens Retaining Ring Screw×1

For fixing the lens retaining ring to the gimbal.

Screw×10

For mounting gimbal to aircraft (2.5*8 Head-cup screw×8).

For fixing the lens retaining ring (M2.5*5 Screw×2).