User manual

28
Specifications
General
Built-In Functions
 Three Working Modes
 Orientation-locked control
 Non orientation-locked control
 FPV mode (Reset)
 Built-in independent IMU module
 DJI gimbal special servos drive module
 HDMI- AV module
 Wireless video transition support
 Camera shutter control support
 Wide range voltage input support
Peripheral
Supported Camera
 SONY NEX-5N
 SONY NEX-7
Supported Lens Currently
SONY：E 16mm f/2.8(SEL16F28)
GCU Input Power
4S~12S LiPo (Recommend 6S if with S800)
Control Requirement
Four spare receiver channels at least
Assistant Software System Requirement
Windows XP SP3; Windows 7
Mechanical& Electrical Characteristics
Working Current
 Static current: 200mA (@25V)
 Dynamic current: 400mA (@25V)
 Locked-rotor current: 4A (@25V)
Operating Temperature
-10°C ~ 50°C
Weight
1.25Kg
Dimensions
200mm ×200mm ×230mm
Frame Dimensions For Camera (Inside)
115mm ×75mm
GCU BEC Output
10A@12V
GCU Wireless Video Transition Power
1A @12V
GCU Weight
300g
GCU Dimensions
64.2 mm ×34.1mm ×19.5mm
Working Performance
Load Weight (Reference Value)
336g(@Sony NEX-5N with Lens and Battery)
Controlled Angle Accuracy
±0.05°