User manual

27
Trouble Shooting
NO.
Station
Why
How to
1
Gimbal keeps drifting
after initialization
(1) TX trims are too much
(1) Adjust the TX trims
(2)GCU and autopilot system
is disconnected
(3)Z15 mounting direction is
disaccording to aircraft nose
(2)Connect GCU and autopilot
system
(3)Ensure Z15 mounting direction
is the same with aircraft nose
2
The gimbal is abnormal
after initializing
Abnormal calibration after
manufacture
Please contact local dealer or DJI
customer service
3
Can’t distinguish gimbal
pointing when using
BVR flight
Switch to FPV Mode first, then to
another Working Mode needed
4
Gimbal LED flashing red
(1) The gimbal and camera
disconnected
(2)Camera is off
(3) Camera setup failure
(1)Make sure cable connected
(2)Please power on camera
(3)Set HDMI resolution as 1080i
5
Gimbal green LED is on
but without video display
(1) Wireless video transition
unit disconnected
(2)Wrong power supply for
wireless video transition unit
(1) Check the wireless video
transition unit connection
(2) Ensure the power supply for
wireless video transition unit is 12V