User manual
16
GCU Ports Indication
Following table shows GCU channels and TX channels connection.
TX channels
GCU
Channels
Indications
JR
Futaba/Hitec
AILE
1
ROLL
For roll axis control (left/right). Velocity is zero if disconnection.
ELEV
2
TILT
For tilt axis control. Velocity is zero if disconnection.
RUDD
4
PAN
For pan axis control. Velocity is zero if disconnection.
AUX2
7
MODE
For Working Mode switch.
2-position switch channel
SHUT
For camera shutter control. Off when non-connection and
disconnection.
2-position switch channel
AUX1
For HDMI-AV conversion switch. Conversion function is on
while non-connection or disconnection.