User manual

10
Mount
Mount Lens
Follow the procedures to obtain better experience.
Step1
Step2
Step3
align
align
Camera
Retaining Ring
Lens
L-Connector
Screw
Jackscrew
Mark
Shim
Step1: Put retaining ring through lens before mounting onto camera, accurate the alignment by
matching the mark.
Step2: Slip the shim between lens and retaining ring, fix in (but not tighten) screws (M2.5*5 Screw×2).
Step3: The L-Connector is active.
Mount Camera into Gimbal
Retaining Ring Screw
Camera Mounting Screw
Jackscrews and Other Screws
Step4: Mount the camera into the gimbal and tighten the camera mounting screw.
Step5: Adjust the L-Connector, and fix the retaining ring screw.
Step6: Tighten the jackscrews and other screws.