Contents Foreword Caution ...................................................................................................................................... 3 Important Safety Information .................................................................................................. 5 Overviewing the Monitor Viewing the Control Panel ........................................................................................................ 9 Viewing the Connecting Panel ................................
Contents Setting the Picture Changing the Screen Form ...................................................................................................... 36 Selecting the Black Enhancer ................................................................................................ 37 Adjusting the PC Screen (Geometry) ...................................................................................... 38 - Native Mode.....................................................................................
Caution CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Caution Always be careful when using your the monitor. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8.
Important Safety Information Follow all operating and use instructions. Unplug the monitor from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaners. Do not use the monitor where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc. Never add any attachments and/or equipment without approval of the manufacturer. Such additions can increase the risk of fire, electric shock, or other personal injury.
Important Safety Information Provide ventilation for the monitor. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the monitor on a bed, sofa, rug or other similar surface. Do not place it near a radiator or heat register. If you place the monitor on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions for mounting.
Important Safety Information Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock. Do not insert anything through the openings in the unit, where they can touch dangerous voltagepoints or damage parts. Never spill liquid of any kind on the monitor. Bend antenna cable between inside and outside building to prevent rain from flowing in. - This may cause water damaged inside the monitor and could give an electric shock. Ground outdoor antennas.
Important Safety Information When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit. Upon completion of any service or repairs to this the monitor, ask the service technician to perform safety checks to determine that the monitor is in a safe operating condition.
Viewing the Control Panel OSD Button Position Front Panel OSD Button & Function 1 Input Source Select 2 Up (See the box below) 3 4 5 6 Down (See the box below) Power (Standby) Remote Sensor Status/Power Indicator LED OR OSD Button Function INPUT SELECT Select the signal source from multiple input sources such as TV, SCART 1, SCART 2, S-Video/AV, Component 1, Component 2, PC and DVI. VOL / CH To change the CHANNEL, press button first and change the channel with , buttons.
Viewing the Connecting Panel Back Panel and Jacks < Back panel of the monitor > 1 RS-232C To Control from PC 2 DVI For PC, Set Top Box 3 D-Sub (PC), DVI Sound PC/DVI Audio Input 4 D-Sub (PC) For PC, Set Top Box 5 Component 1, 2 For DVD, Set Top Box 6 Component Sound For Component Audio Input 7 Speakers To Connect Speakers (2CH, Stereo) 8 SCART 1 (Euro connector) For VCR, DVD, Set Top Box 9 SCART 2 (Euro connector) For VCR, DVD, Set Top Box 10 S-Video For DVD, Set Top Box, S-VH
Viewing the Connecting Panel 1 RS-232C Jack Connects a control signal from a PC. 2 DVI Input Jack Connects a digital video signal from a DVI output jack of PC or set top box. 3 D-Sub (PC), DVI Sound Connects a sound signal from PC or DVI. 4 RGB PC Input Jack (D-Sub) Connects a video signal from a video output jack of PC. Cables connecting the PC vary according to the type of machine, so contact your product dealer.
Viewing the Remote Control Button Description 1 Power Turn the monitor on and off. 2 Mute Temporarily cut the sound and restore it. 3 Pre.PG Turn to the previous programme or exit OSD. 4 V.Size Choose the Screen Form. 16:9 ➔ Panorama ➔ Zoom1 ➔ Zoom2 ➔ 4:3 5 Favorite Tune to your next favorite programme. 6 TEXT Teletext ON/OFF. TTX ➔ TTX/MIX ➔ Normal (TTX off) 7 INPUT Display the input source list. 8 Menu/Set Display the main OSD menu. Activate your choice in the OSD menu.
Viewing the Remote Control 1 MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono ➔ Stereo ➔ Language A ➔ Language B ➔ Language AB • You can select only available modes depending on the source. 2 PG INFO Display the current information about time, screen form, source and MTS mode. 3 PICTURE There are 4 picture modes. Standard ➔ Vivid ➔ Mild ➔ User 4 STILL Temporarily freeze the screen and restore it. 5 SOUND Choose the sound equalizer settings.
Viewing the Remote Control MOVE button : Move the position of PIP window. Left Up Right Up(Start) Left Down Right Down SWAP button : Swap the sources of the main screen and PIP window. MODE button : Change the PIP window mode. OFF ➔ Small ➔ Large ➔ Twin Small Large Twin SOURCE button : Change the source of the PIP window. The available sources are shown as below.
Viewing the Remote Control Loading the Batteries 1 Press on the cover and slide in the direction of the arrow. 2 Load two AAA batteries, taking care that the + and - ends face the correct direction. 3 Close the cover until it clicks.
Installation Table Stand Installation (optional) < The monitor can be installed on the desk as shown above. > • Table stand mount minimum allowable clearances for adequate ventilation. 1.18 inch (3cm) 4 inch(10.16cm) 4 inch (10.16cm) 4 inch (10.16cm) 2.36 inch (5.
Installation Speaker Installation (optional) To Main Unit To Speaker Wire Saddle Wire Saddle SPEAKER (8Ω) SPEAKER (8Ω) Ferrite Core * CAUTION : Please make sure speaker wires should be connected as above, ferrite core are to be nearer to the main unit not to speakers to avoid possible electromagnetic-interference. • Be sure monitor power is turned off before making any connections. Place the speakers in the position you want. Install the speaker wires on the monitor and speaker.
Connecting the TV Cable TV Antenna Cable Connecting the TV Cable 1 Connect the TV Antenna cable to the TV input jack. Press INPUT button on the remote control and select TV on OSD. 2 Use PG+/PG- button or numeric button to change TV programme for your programme selection. 3 Press Pre.PG button on the remote control to tune the previous programme. 4 Also, you can tune to cable service provided programmes using the cable box.
Connecting the VCR SCART 2 (Euro connector) SCART 1 (Euro connector) S-Video AV Input Sound of S-Video/AV Connecting the VCR With SCART (Euro cable) Connect a SCART cable to the SCART jacks of the VCR and the monitor. With S-Video Connect a S-Video cable to the S-Video jacks of the VCR and the monitor. Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the monitor. With AV Input Connect a composite cable to the AV video jacks of the VCR and the monitor.
Connecting the DVD Connecting the DVD • Connect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the component jacks on the monitor. • Connect the audio cable to the DVD player's audio L (White) and R (Red) jacks and to the L and R audio jacks beside the component jacks on the monitor. Component 1 & Sound Component 2 & Sound How to Use 1 Turn on the DVD player. 2 Press INPUT button on the remote control of the monitor and select Component 1 or Component 2.
Connecting the Set Top Box How to Connect Connect set top box video inputs to SCART, Component, PC or DVI jacks on the monitor. Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs. How to Use Supported Signals Component 1 1 2 Turn on the set top box. 480i/60Hz Press INPUT button on the remote control of the monitor and select Component 1, Component 2, PC or DVI.
Connecting the PC [ D-Sub & DVI ] D-Sub 15pin (VGA) from PC DVI from PC Connecting a PC to the monitor Connect a PC (15pin) video cable between the video output port on the PC and the PC port on the monitor. Description 1 Red (R) Pin Configuration 2 Green (G) 15pin signal cable (based on protruded pin). 3 Blue (B) 4 Grounding To watch the PC screen 1 22 Pin No. Turn on the monitor and press Input button to select the PC mode. 2 Turn on the PC and check for the PC requirement.
Displayable Monitor Specification Resolution 640 x 350 640 x 400 640 x 480 800 x 600 Horizontal Frequency (KHz) Vertical Frequency (Hz) 31.468 70.09 37.861 85.08 31.469 70.08 37.927 85.03 31.469 59.94 35.000 66.66 37.861 72.80 37.500 75.00 43.269 85.00 45.913 90.03 53.011 100.04 64.062 120.000 35.156 56.25 37.879 60.31 48.077 72.18 46.875 75.00 53.674 85.06 56.000 90.00 64.016 100.00 832 x 624 49.725 74.55 852 x 480 31.468 60.05 48.363 60.00 56.476 70.
Basic Operation Turning the Monitor ON/OFF Press the Power button on the remote control. The monitor will turn on and you will be ready to use its features. You can also use the Power button on the front panel. Select Source Press INPUT button on the remote control. Then you can see the source list menu shown as below. Source Change 1 TV 2 SCART 1 3 SCART 2 4 S-Video/AV Select the source to watch with PG+/PG- button on the remote control and press the Menu/Set button.
OSD Menu Structure • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu. Example of OSD Menu Picture Mode Temperature Normal Video NR ¥ OFF Film Mode ¥ OFF Screen Form Black Enhancer 1 Standard 16 : 9 ¥ OFF Main Menu Press Menu/Set button on the remote control to enter the main OSD menu.
Setting the Channel Storing Channels Automatically You can now search for and store the TV channels in two different ways : using Auto Scan or Manual Scan. 1 Press Menu/Set button to display the main OSD menu. 2 Select the TV main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select Auto Scan with PG+/PG- buttons and press Menu/Set button on the remote control. Then there will appear the Auto Scan sub menu. Auto Scan 5 Select your country. Then the tuning bar will appear.
Setting the Channel Auto Scan (Other Countries) Asia Nation Selection Nation Selection Malaysia Others Israel Others Pakistan Others Kuwait Others Singapore Others Arab Emirates Others Iran Others China Czech Republic Saudi Arabia Others Europe Nation Selection Nation Selection Albania Others Estonian Hungary Andorra Others Georgia Hungary Croatia Others Latvia Hungary Iceland Others Lithuania Hungary Macedonia Others Russian Fed.
Setting the Channel Storing Channels Manually 1 Press Menu/Set button on the remote control to display the main OSD menu. 2 Select the TV main menu with PG+/PG- button on the remote control. Auto Scan 3 Press Menu/Set button to enter the sub menu. Manual Scan 4 Select Manual Scan with PG+/PG- button and press Menu/Set button. Fine Tune 5 Then you can see the tuning bar. the monitor will scan from channels to the current channel.
Setting the Channel Editing the Channels Edit Favorite Programme List You can store of your favorite channels for each available input source (such as TV or CATV). Then, when you press the Favorite button on the remote control, the monitor display only the favorite channels you previously stored, allowing you to quickly and easily find frequently wanted channels. 1 Press Menu/Set button to display the main OSD menu. 2 Select the TV main menu. 3 Press Menu/Set button to enter the sub menu.
Digest Function Digest Function In the digest function, you can watch 9 programmes at the same time. (This function works only in TV mode) 1 Press the DIGEST button on the remote control. 2 By pressing the channel number, the selected channel becomes main window. 3 You can make off the digest function by pressing DIGEST button again. Only memorized channels can be displayed in the digest function. 13 windows are available for 42(HD) Plasma TV. 15 windows are available for 50" and 63" Plasma TV.
TELETEXT Teletext On/Mix/Off You can switch on and off teletext function by pressing TEXT button on remote control. TOP Text The user guide displays four fields - red, green, yellow and blue - at the bottom of the screen. The yellow field denotes the next group and the blue field denotes next block. Block/Group/Page Selection - With the blue button you can move block to block. Use the yellow button to proceed to the next group with automatic overflow to the next group.
Setting the Picture Changing the Picture Mode Your the monitor has 3 automatic factory preset picture settings (Standard, Vivid and Mild). You can choose Standard, Vivid or Mild by pressing PICTURE button on the remote control (or by making a selection from the menu). Or you can select User which automatically recalls your personalized picture settings. 1 Press Menu/Set button to display the main OSD menu. Mode 2 Select the Picture main menu. Temperature 3 Press Menu/Set button to enter the sub menu.
Setting the Picture Adjusting the User Mode You can change the Contrast, Brightness, Color, and Sharpness according to personal preference in User mode. 1 Select the item to adjust with PG+/PG- button. Select User mode (Previous page) 2 Press Menu/Set button. 3 Adjust the item with VOL+/VOL- button. Contrast 4 To cancel all adjust, select Recall and press Menu/Set button. Brightness Color Sharpness For a more detailed description of these settings, see the next page.
Setting the Picture Contrast Adjust brightness difference between bright part of the screen and dark part. Distinct Vague Dark Bright Decrease Increase Less sharp Sharp Brightness Adjust brightness of the screen. Color Adjust deep and light colour of the screen. Sharpness Adjust vividness of the screen.
Setting the Picture Changing the Colour Temperature Your the monitor has 5 screen temperatures (colour settings). 1 Press Menu/Set button to display the main OSD menu. 2 Select the Picture main menu. Temperature 3 Press Menu/Set button to enter the picture menu. Video NR ¥ OFF 4 Select Temperature and press Menu/Set button to enter the sub menu. Then the picture-temperature sub menu appear.
Setting the Picture Selecting the Film Mode This mode is in order to watch a movie composed of 24 frames smoothly when the movie is converted to 30 frames on TV. Mode Temperature 1 Press Menu/Set button to display the main OSD menu. Select the picture main menu item. 2 Press Menu/Set button to enter the sub menu. 3 Select Film Mode and press VOL+ button to enter the ¥ parts. Then the cursor moves into the ¥ parts. 4 Turn on or off Film Mode function with PG+/PG- button and press Back button.
Setting the Picture Screen Form Description 16:9 16:9 video : No change. 4:3 video : Expands 4:3 video signal horizontally to fit the 16:9 screen. Panorama 16:9 video : No change. 4:3 video : Expands 4:3 video horizontally to fit the 16:9 screen and to minimize distortion, sides are expanded more than center. Zoom 1 Expands 16:9 mode screen vertically. Zoom 2 Expands Zoom 1 mode screen vertically. 4:3 16:9 video : The image is suppressed. 4:3 video : No expansion. There are gray areas besides the image.
Setting the Picture [ PC ] In PC mode, you can adjust the H, V-Position, Native Mode and Phase. Also you can adjust them automatically. Adjusting the PC Screen (Geometry) You can change H, V-Position, Native Mode and Phase in PC mode like usual PC monitors. You can also adjust them automatically. (Auto adjust function.) 1 Press Menu/Set button to display the main OSD menu. 2 Select the Picture main menu with PG+/PG- button.
Setting the Picture [ PC ] H-Position V-Position Phase Mismatch Match Native Mode When you use monitor, 42(SD) native mode display all timing to 852 x 480 mode. When you off native mode, monitor display 640 x 480 mode expect 848 x 480. When you use monitor, 50/63 native mode display all timing to 1366 x 768 mode. When you off native mode, monitor display 1366 x 768 mode expect 1360 x 768. 1 2 Select Native Mode menu and press VOL+ button to enter the ¥ parts. Then the cursor moves into the ¥ parts.
Setting the Sound In Sound menu, you can adjust balance, MTS ( Multi-Track Sound), AVC (Auto Volume Control) and select the equalizer settings. Adjusting the Sound Balance This control allows you to adjust the balance of the left and right speaker output. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Sound main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select Balance and press Menu/Set button. 5 Adjust the Balance with VOL+/VOL- button and press Menu/Set button.
Setting the Sound Adjusting User Sound Mode You can use the OSD menu to change the Treble, Bass, Balance, and DRC according to your preference. 1 Equalizer menu appear when you select User mode. 2 Select a gain bar with VOL+/VOL- button on the remote control and adjust it with PG+/PG- button. 3 Select User mode (Previous page) Equalizer Press Back button on the remote control to exit equalizer. The result will be saved automatically. 0.1 0.5 1.5 5.0 10.
Setting the Sound MTS (Multichannel Television Sound) Select sound signal format from the input source. There are Mono, Stereo, Language A, Language B, Language AB sound formats. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Sound main menu with PG+/PG- button on the remote control. 3 Press Menu/Set button to enter the sub menu. 4 Select MTS and press Menu/Set button to enter the sub menu. Then the MTS sub menu appear.
Setting the Others In Setup menu, you can adjust the transparency of the OSD menu and set PIP and others. Adjusting the Transparency of the OSD Window Adjust the transparency of the OSD menu. There are 8 step from OFF to 7. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Setup main menu with PG+/PG- button on the remote control. 3 Press Menu/Set button to enter the sub menu. 4 Select Translucent and press VOL+ button to enter the ¥ parts. Then the cursor moves into the ¥ parts.
Setting the Others Changing the Size in PIP Change the size of the PIP window. There are 3 sizes: Small, Large, Twin. 1 Select Size and press VOL+ button to enter the ¥ parts. Then the cursor moves into the parts. 2 Adjust size function with PG+/PG- button and press Menu/Set button. Small Large Twin Choosing the Source in PIP Change the source of the PIP window. 1 2 Select Source and press Menu/Set button to enter the sub menu. Then the PIP sub menu appear. The available sources will be displayed.
Setting the Others Main PIP TV SCART 1 SCART 2 S-Video/AV Component 1 Component 2 PC DVI TV SCART 1 – SCART 2 S-Video/AV – – PC – – – – – – – – – – – – DVI – – – – Component 1 Component 2 Picture Swap in PIP (Picture in Picture) Swap the sources of the main screen and the PIP window. Select Picture Swap and press Menu/Set button. Changing the Position in PIP Change the position of the PIP window.
Setting the Others Advanced You can Set ID, Burn Protect, Burn Clear, Blue Back, Language and Front Key Lock in Advanced menu. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Setup main menu with PG+/PG- button on the remote control.
Setting the Others Burn Clear in Advanced This function will be used for removing sticking image on the screen. 1 Select Burn Clear and press VOL+ button to enter the ¥ parts. Then the cursor moves into the ¥ parts. 2 Turn the function on or off with PG+/PG- button and press Back button.
Setting the Time In the Time menu, you can set the current time and auto power On/Off. Setting the Current Time Set the current time. 1 Press Menu/Set button to display the main OSD menu. Time Set AM 03:29 2 Select the Time main menu. On Time AM 05:11 ON 3 Press Menu/Set button to enter the sub menu. On Channel ¥ 99 4 Select Time Set by pressing VOL+ button.
Setting the Time Setting the On Channel Set the channel when the monitor power turn on automatically. Available only when the time is set and on time is on. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Time main menu with PG+/PG- button on the remote control. Time Set AM 03:29 On Time AM 05:11 ON On Channel ¥ 99 3 Press Menu/Set button to enter the sub menu. On Volume ¥ 100 4 Select On Channel.
Setting the Time Setting the Off Time This the monitor can be set to turn off automatically at specific times that you choose. Before using the timer, you must set the monitor's clock as described previously. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Time main menu with PG+/PG- button on the remote control. 3 Press Menu/Set button to enter the sub menu. 4 Select Off Time with PG+/PG- button on the remote control and press VOL+ button.
Troubleshooting If your monitor is not working properly, please scan this list of problems and possible solutions. It may save you time and money. Problem Quick Action for Possible Solution No picture & no sound • Check whether the monitor is turned on. • Power cord inserted into wall outlet? • Plug another product's power cord into the wall outlet where the monitor's power cord was plugged in. Picture ok & no sound • Press the VOLUME() button. • Check the audio input signal.
Specification 42" Plasma TV (1) Function and Specification Display Size 42-Inch 16 : 9 Diagonal Screen Display Mode Variable 4 Modes (4:3 Mode / 16:9 X 3 Modes) Pixel Format 852 X 480 Physical Pixel * (SD) Contrast Ratio 3000 : 1 Brightness 1000 cd/m 2 Resolution (RGB) 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP(picture in picture) with four selectable window 1024 X 768 Physical Pixel ** (HD) positions on Video mode Input Compatible Multiple input compatible Video Advanced mo
Specification 42" Plasma TV (2) Function and Specification Display Size 42-Inch 16 : 9 Diagonal Screen Display Mode Variable 4 Modes (4:3 Mode / 16:9 X 3 Modes) Pixel Format 852 X 480 Physical Pixel (SD) Contrast Ratio 3000 : 1 Brightness 1000 cd/m 2 Resolution (RGB) 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP(picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital / Motion-Adaptive De-int
Specification 50" Plasma TV Function and Specification Display Size 50-Inch 16 : 9 Diagonal Screen Display Mode Variable 4 Modes (4:3 Mode / 16:9 X 3 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 3000 : 1 Brightness 1000 cd/m 2 Resolution (RGB) 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP(picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital / Motion-Adaptive De-interlace p
Specification 63" Plasma TV Function and Specification Display Size 63-Inch 16 : 9 Diagonal Screen Display Mode Variable 4 Modes (4:3 Mode / 16:9 X 3 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 1000 : 1 Brightness 800 cd/m 2 Resolution (RGB) 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP(picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital / Motion-Adaptive De-interlace pr
