OWNERS ' MANUAL REMOTE CONTROLLER Please read carefully and thoroughly this manual before operating this unit and save it in a safe place for future reference.
CONTENTS Warning 1. Be sure there are no barriers between the remote controller and the receiver of indoor unit otherwise the air conditioner will not work. 2. Keep the Remote Controller away from all liquids. 3. Protect the Remote Controller from high temperatures and exposure to radiation. 4. Keep the indoor receiver out of direct sunlight or the Air Conditioner may malfunction. 5. Keep controller away from EMI (Electro-Magnetic Interference) supplied by other household appliances.
Remote Controller Specifications R71A/E Model Rated Voltage 3.0V Lowest Voltage of CPU Emitting Signal 2.0V Reaching Distance 8m (when using 3.0 voltage, it Gets 11m) Environment Temperature Range -5 C 60 C ~ HEAT DRY FAN only and AUTO . 2. Timer Setting Function in 24 hours. 3. Indoor Setting Temperature Range : 17 C~30 C. 4. LCD (Liquid Crystal Display) of functions.
COOL , HEAT, and FAN ONLY Operation 1. If the AUTO mode is not comfortable , you may manually override the settings by using COOL, DRY, HEAT( HEAT PUMP units only), or FAN ONLY modes. 2. Push the or button to set the desired room temperature. When in COOLING mode, the most comfortable settings are 21 C or above. When in HEATING mode, the most comfortable settings are 28 C or below. 3. Push the Fan button to select the FAN mode of AUTO, HIGH, MED or LOW. 4. Push the On/off button.
Operating the Remote Controller Names and Functions of indicators on Remote Controller Install / Replace Batteries Display Panel 2 1 TRANSMISSION Indicator: This indicator lights when remote controller transmits signals to indoor unit. 2 MODE indicator: Displays the current operation modes. Including AUTO( ), COOL( ), DRY( ) , HEAT( ) or FAN( ). HEAT only available for heat pump model. TEMPERATURE indicator: Displays the temperature settings(17 to 30 ).