Installation Sheet

POWER UP YOUR LIGHTS
1. Whether lights are surface mounted or recessed mounted the wiring procedure remains the same.
2. Use only wire harness supplied by Dainolite Ltd.
3. It is highly desirable to install LED driver within maximum 5 meters (15’) of your last light.
4. Connect harness to lead from LED Driver. Connectors are male and female and can be used in any sequence. If the distance between the
connectors is greater than on the harness, do not use that connector but move on to the next closest one. For greater distance than 1.2M (48”)
connect two harnesses together or use extension DLST42-5 (purchased separately).
5. For “hardwire” applications from remote location see detailed instructions on website dainolite.ca.
LED Hardwire Drivers with case
24V DC Class II certified
Non dimmable
DMDR60-16 - 16Watt 120 x 43 x 32mm (5 x 1.7 x 1.26”)
DMDR445-30 - 30Watt 220 x 73 x 45mm (8.7 x 2.9 x 1.8”)
DMDR445-75 - 75Watt 220 x 73 x 45mm (8.7 x 2.9 x 1.8”)
DRLED96 - 96Watt 274 x 76 x 34mm (10.8 x 3 x 1.4”)
LED Hardwire Drivers with case
24V DC Class II certified
Dimmable
DMDR43-20 - 20Watt 215 x 62 x 46mm (8.46 x 2.44 x 1.8”)
DMDR43-30 - 30Watt 215 x 62 x 46mm (8.46 x 2.44 x 1.8”)
DMDR445-45 - 45Watt 220 x 73 x 45mm (8.7 x 2.9 x 1.8”)
These drivers are compatible for use with LUTRON DVELV or DVCL type
dimmer only. Use of any other brand or model will void warranty.
Plug-in Drivers
24V DC Class II certified
PIDR-60 - 60Watt 123 x 55 x 35mm (4.84 x 2.17 x 1.38”)
PIDR-96 - 96Watt 154 x 62 x 38mm (6.06 x 2.44 x 1.50”)
Route power cord to nearest convenience outlet. Do not conceal power supply cord inside walls, ceiling or floors.
Lower Wattage plug-in drivers can be made available for bulk purchases. Please contact [e-mail] with your requirements.
WARRANTY
Dainolite Ltd. offers a 3 year factory warranty from date of purchase on all LED products. This warranty is expressly limited to repair or replacement of
defective product only. Any consequential damages or labor costs arising from a defect are excluded.
This warranty only applies to products that have been assembled for use, using only Dainolite Ltd. components (drivers, harnesses and connectors). If
any component in the finished assembly and final use is not supplied by Dainolite Ltd. said warranty is not applicable. Not all dimmers are compatible to
be used with Dainolite Ltd. dimmable drivers. Consult product instruction sheet for list of approved dimmers. Use of unapproved dimmer will nullify your
warranty.
Dainolite’s obligation under this warranty shall not extend beyond the distributor’s initial purchase price of the product.
This warranty does not apply to products that have been altered, improperly installed, mishandled or misused.
DO NOT RETURN PRODUCT TO THE RETAILER.
For warranty:
Contact the factory directly in writing: Email [e-mail]. Include copy of purchase invoice and describe defect. A factory person will contact
you directly to advise what further action will be taken.
For missing hardware or broken glass:
Contact the factory directly in writing: Email [e-mail]. The missing or broken parts will be shipped to you directly the same day after receipt
of your email (weekend excluded).
1401 Courtney Park Drive East, Mississauga, Ontario, Canada, L5T 2E4
Tel. [phone] Fax. [phone] E-Mail: [e-mail] Web: www.dainolite.ca
12/14
Driver requires a minimum
load of half its total capacity.
Warning! Do not connect this
product directly to 120V AC power.
Use with 24V DC Driver onl
y
.